Had the same problem on my setup, ended up being the driver for the scsi
controller. My Setup was Redhat 9.0, same scsi card but a dell powervault
122T


There is a update driver on adaptec's site for download that you have to
make a driver disk using the dd command. Anyway that is what fixed it for
me.

Jason 


> From: Ping Wing <z1ngsz0ng AT yahoo DOT com>
> Date: Sat, 16 Oct 2004 19:14:50 -0700 (PDT)
> To: <amanda-users AT amanda DOT org>
> Subject: Error with sense data: Info fld=0x40, Current st0: sense key Medium
> Error
> 
> Hi.
> 
> my hardware:
> 
> scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>         <Adaptec 2940 Ultra SCSI adapter>
>         aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
> 
> (scsi1:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
>   Vendor: SONY      Model: TSL-11000         Rev: L0u6
>   Type:   Sequential-Access                  ANSI SCSI revision: 02
>   Vendor: SONY      Model: TSL-11000         Rev: L0u6
>   Type:   Medium Changer                     ANSI SCSI revision: 02
> 
> tapes are Sony DDS4 Premium DGD150P
> 
> in amanda.conf 
> define tapetype Sony-GDG150P {
>         # http://amanda.sourceforge.net/cgi-bin/fom?_recurse=1&file=46
>         comment "Sony DDS4 Premium DGD150P Tape"
>         length 16513 mbytes
>         filemark 0 kbytes
>         speed 2213 kps
> }
> 
> 
> 
> Weird error is:
> 'Error with sense data: Info fld=0x40, Current st0: sense key Medium Error'
> 
> what could cause this?
> 
> 
> 
> _______________________________
> Do you Yahoo!?
> Declare Yourself - Register online to vote today!
> http://vote.yahoo.com