Hi Kevin,
The latest amanda snapshot should have a fix for this, could you try it?
Jean-Louis
On Fri, Sep 10, 2004 at 09:56:45AM -0400, KEVIN ZEMBOWER wrote:
> I just noticed these errors in the output of amstatus, from a run last night:
> amanda@www:/etc/amanda/Outside$ amstatus Outside
> Using /var/amanda/Outside/amdump.1 from Fri Sep 10 00:45:02 EDT 2004
>
> www:sda1 1 0k finished (0:51:14)
> www:sda10 2 1919k finished (0:51:51)
> www:sda11 0 3319737k finished (4:42:52)
> www:sda12 1 150k wait for dumping driver: (aborted)
> Use of uninitialized value in printf at /usr/local/sbin/amstatus line 742.
> www:sda14 0 0k failed to tape (7:20:40)
> Use of uninitialized value in addition (+) at /usr/local/sbin/amstatus line
> 757.
> Use of uninitialized value in addition (+) at /usr/local/sbin/amstatus line
> 767.
> www:sda2 2 104343k finished (0:56:14)
> www:sda5 1 120k finished (0:52:07)
> www:sda6 1 3094k wait for dumping driver: (aborted)
> www:sda7 0 5295676k finished (3:01:40)
> www:sda8 2 50437k finished (1:02:50)
>
> SUMMARY part real estimated
> size size
> partition : 10
> estimated : 10 14068515k
> flush : 0 0k
> failed : 0 0k ( 0.00%)
> wait for dumping: 2 3244k ( 0.02%)
> dumping to tape : 0 0k ( 0.00%)
> dumping : 0 0k 0k ( 0.00%) ( 0.00%)
> dumped : 8 13847339k 14065271k ( 98.45%) ( 98.43%)
> wait for writing: 1 0k 5075107k ( 0.00%) ( 0.00%)
> wait to flush : 0 0k 0k (100.00%) ( 0.00%)
> writing to tape : 0 0k 0k ( 0.00%) ( 0.00%)
> failed to tape : 1 0k 5075107k ( 0.00%) ( 0.00%)
> taped : 7 8772232k 8990164k ( 97.58%) ( 62.35%)
> tape 1 : 7 8772232k 8990164k ( 53.47%) Outside-04
> 4 dumpers idle : not-idle
> taper idle
> network free kps: 5800
> holding space : 3392k (100.00%)
> dumper0 busy : 6:29:10 ( 99.93%)
> taper busy : 6:27:14 ( 99.43%)
> 0 dumpers busy : 0:00:16 ( 0.07%) start-wait: 0:00:16 (100.00%)
> 1 dumper busy : 6:29:10 ( 99.93%) not-idle: 6:27:14 ( 99.50%)
> start-wait: 0:00:59 ( 0.25%)
> no-bandwidth: 0:00:56 ( 0.24%)
> amanda@www:/etc/amanda/Outside$
>
> Has the bahavior of amstatus changed? I thought you couldn't get an amstatus
> after the run was completed.
>
> Here's the section of the code:
> 737
> elsif($taper_finished{$hostpart} < 0) {
> 738 if( defined
> $opt_failed ||
> 739 (defined
> $opt_waittaper && ($taper_finished{$hostpart} == -1))) {
> 740 printf "%8s
> ", $datestamp if defined $opt_date;
> 741 printf
> "%-${maxnamelength}s%2d", "$host:$partition", $level{$hostpa
> 741 rt};
> 742 printf
> "%9dk", $size{$hostpart};
> 743 if($in_flush
> == 0) {
> 744
> print " failed to tape";
> 745 }
> 746 else {
> 747
> print " failed to flush";
> 748 }
> 749 print "
> (will retry)" unless $taper_finished{$hostpart} < -1;
> 750 if( defined
> $starttime ) {
> 751
> print " (", &showtime($taper_time{$hostpart}), ")";
> 752 }
> 753 print "\n";
> 754 }
> 755
> 756 $tfpartition++;
> 757 $tfsize +=
> $size{$hostpart};
> 758 if(defined
> $esize{$hostpart}) {
> 759 $tfesize +=
> $esize{$hostpart};
> 760 }
> 761 else {
> 762 $tfesize +=
> $size{$hostpart};
> 763 }
> 764
> 765 if($in_flush == 0) {
> 766
> $twpartition++;
> 767 $twsize +=
> $size{$hostpart};
> 768 if(defined
> $esize{$hostpart}) {
> 769
> $twesize += $esize{$hostpart};
> 770 }
> 771 else {
> 772
> $twesize += $size{$hostpart};
> 773 }
> 774 }
>
> I'm not much of a coder, but these don't seem significant; just complaining
> about output strings which can't be printed.
>
> Here's the version info:
> amanda@www:/etc/amanda/Outside$ amadmin Outside version
> build: VERSION="Amanda-2.4.4p3"
> BUILT_DATE="Wed Aug 18 16:27:23 EDT 2004"
> BUILT_MACH="Linux www.jhuccp.org 2.4.18-bf2.4 #1 Son Apr 14 09:53:28
> CEST 2002 i686 unknown"
> CC="gcc"
> CONFIGURE_COMMAND="'./configure' '--with-user=amanda'
> '--with-group=disk' '--with-owner=amanda' '--with-tape-device=/dev/nst0'
> '--prefix=/usr/local' '--with-portrange=10080,10083'
> '--with-tcpportrange=10080,10083' '--with-udpportrange=850,854'
> '--with-debugging=/tmp/amanda-dbg/' '--with-configdir=/etc/amanda'"
> paths: bindir="/usr/local/bin" sbindir="/usr/local/sbin"
> libexecdir="/usr/local/libexec" mandir="/usr/local/man"
> AMANDA_TMPDIR="/tmp/amanda"
> AMANDA_DBGDIR="/tmp/amanda-dbg/" CONFIG_DIR="/etc/amanda"
> DEV_PREFIX="/dev/" RDEV_PREFIX="/dev/" DUMP="/sbin/dump"
> RESTORE="/sbin/restore" VDUMP=UNDEF VRESTORE=UNDEF
> XFSDUMP=UNDEF XFSRESTORE=UNDEF VXDUMP=UNDEF VXRESTORE=UNDEF
> SAMBA_CLIENT=UNDEF GNUTAR="/bin/tar"
> COMPRESS_PATH="/bin/gzip" UNCOMPRESS_PATH="/bin/gzip"
> LPRCMD=UNDEF MAILER="/usr/bin/Mail"
> listed_incr_dir="/usr/local/var/amanda/gnutar-lists"
> defs: DEFAULT_SERVER="www.jhuccp.org" DEFAULT_CONFIG="DailySet1"
> DEFAULT_TAPE_SERVER="www.jhuccp.org"
> DEFAULT_TAPE_DEVICE="/dev/nst0" HAVE_MMAP HAVE_SYSVSHM
> LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE
> AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS
> CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP
> COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
> COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
> amanda@www:/etc/amanda/Outside$
>
> Thanks for your thoughts on this. Let me know if there's anything else I can
> to to help solve this problem.
>
> -Kevin
>
--
Jean-Louis Martineau email: martineau AT iro.umontreal DOT ca
Département IRO, Université de Montréal
C.P. 6128, Succ. CENTRE-VILLE Tel: (514) 343-6111 ext. 3529
Montréal, Canada, H3C 3J7 Fax: (514) 343-5834
|
