--On Wednesday, March 03, 2004 14:47:13 -0700 "Russell L. Carter" <rcarter AT
pinyon DOT org> wrote:
>
> Greetings,
> I'm testing amanda 2.4.4p2 on mix of FreeBSD stable/current and
> debian stable/testing boxes, and one debian testing box
> is acting up. It has a single partition, and I want
> to dump its /root and /etc directories. The /etc dump
> seems to work fine, but when it dumps /root, it takes the
> entire partition. This does not happen on any of the other
> four machines. None of the other machines has just a single
> partition, if it matters.
>
> I've attached the disklist and the backup report.
>
> Any pointers, etc. would be much appreciated.
>
> Thanks,
> Russell
> *************************************************************
> Here's the disklist. Commented out entries work just fine
> on my other systems. I've tried all of the possible naming
> schemes on brower, but they all fail the same way.
>
># brower /etc / {
># comp-root-tar
># }
> brower /root / {
It's picking up that / as the device and backing it up. You have
the same problem on the commented-out /etc entry above. Your report
shows that the size of /etc is the same size as /root, so it ran out
of tape trying to fit / on the tape twice.
The diskdevice is optional if it is the same as the diskname field,
or you can set it the same as the diskname if you want all your entries
to have the same number of fields.
Just change the line to:
brower /root {
or
brower /root /root {
and it should do what youwant it to.
Frank
> comp-root-tar
> }
># aristotle /dev/hda1/etc /dev/hda1 {
># comp-root-tar }
># 1 local
># aristotle /dev/hda1/root /dev/hda1 {
># comp-root-tar
># } 1 local
># feyerabend /dev/twed0s1a/etc /dev/twed0s1a {
># comp-root-tar
># }
># feyerabend /dev/twed0s1a/root /dev/twed0s1a {
># comp-root-tar
># }
># quine /dev/ad0s1a/etc /dev/ad0s1a {
># comp-root-tar
># }
># quine /dev/ad0s1a/root /dev/ad0s1a {
># comp-root-tar
># }
># leopold /dev/hda1/etc /dev/hda1 {
># comp-root-tar
># }
># leopold /dev/hda1/root /dev/hda1 {
># comp-root-tar
># }
> *************************************************************
> Here's the backup report, there's only a few MB in brower's
> /root directory, and from the error output it's clearly dumping
> outside of /root.
>
> These dumps were to tapes pinyon17, pinyon1.
> The next 3 tapes Amanda expects to used are: a new tape, a new tape, a new
> tape.
> The next 3 new tapes already labelled are: pinyon2, pinyon3, pinyon4.
>
> FAILURE AND STRANGE DUMP SUMMARY:
> brower /root lev 0 FAILED ["data write: Connection reset by peer"]
> brower /root lev 0 FAILED [dump to tape failed]
>
>
> STATISTICS:
> Total Full Daily
> -------- -------- --------
> Estimate Time (hrs:min) 0:00
> Run Time (hrs:min) 2:35
> Dump Time (hrs:min) 2:18 2:18 0:00
> Output Size (meg) 8549.0 8549.0 0.0
> Original Size (meg) 12614.4 12614.4 0.0
> Avg Compressed Size (%) 67.8 67.8 --
> Filesystems Dumped 2 2 0
> Avg Dump Rate (k/s) 1053.6 1053.6 --
>
> Tape Time (hrs:min) 2:18 2:18 0:00
> Tape Size (meg) 8549.0 8549.0 0.0
> Tape Used (%) 177.7 177.7 0.0
> Filesystems Taped 2 2 0
> Avg Tp Write Rate (k/s) 1053.5 1053.5 --
>
> USAGE BY TAPE:
> Label Time Size % Nb
> pinyon17 1:07 4274.4 88.8 1
> pinyon1 1:12 4274.6 88.8 1
>
>
> FAILED AND STRANGE DUMP DETAILS:
>
> /-- brower /root lev 0 FAILED ["data write: Connection reset by peer"]
> sendbackup: start [brower:/root level 0]
> sendbackup: info BACKUP=/bin/tar
> sendbackup: info RECOVER_CMD=/bin/gzip -dc |/bin/tar -f... -
> sendbackup: info COMPRESS_SUFFIX=.gz
> sendbackup: info end
>| gtar: ./dev/log: socket ignored
>| gtar: ./home/rcarter/.xine/session.0: socket ignored
>| gtar: ./tmp/.X11-unix/X0: socket ignored
>| gtar: ./tmp/.X11-unix/X64: socket ignored
>| gtar: ./tmp/.font-unix/fs7100: socket ignored
>| gtar: ./tmp/ssh-QKL11640/agent.11640: socket ignored
>| gtar: ./tmp/ssh-ZbGx8745/agent.8745: socket ignored
>| gtar: ./tmp/ssh-bRI11629/agent.11629: socket ignored
>| gtar: ./tmp/ssh-lnPt8762/agent.8762: socket ignored
> \--------
>
>
> NOTES:
> planner: Adding new disk brower:/etc.
> planner: Adding new disk brower:/root.
> taper: tape pinyon17 kb 4928480 fm 2 writing file: No space left on device
> taper: retrying brower:/root.0 on new tape: [writing file: No space left on
> device]
> taper: tape pinyon1 kb 4377248 fm 1 [OK]
>
>
> DUMP SUMMARY:
> DUMPER STATS TAPER STATS
> HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
> -------------------------- --------------------------------- ------------
> brower /etc 0 64582404376991 67.8 66:541090.5 66:541090.4
> brower /root 0 64589504377195 67.8 71:351019.1 71:361019.0
>
> (brought to you by Amanda version 2.4.4p2)
> *************************************************************
--
Frank Smith fsmith AT hoovers DOT com
Sr. Systems Administrator Voice: 512-374-4673
Hoover's Online Fax: 512-374-4501
|
