Re: strange am-label issue
2003-06-17 05:43:49
> $ more chg-zd-mtx.20030617110112.debug
> chg-zd-mtx: debug 1 pid 2176 ruid 11 euid 11: start at Tue Jun 17 11:01:12
> 2003
> 11:01:12 Arg info:
> $# = 2
> $0 = "/opt/amanda-2.4.4/libexec/chg-zd-mtx"
> $1 = "-slot"
> $2 = "next"
> 11:01:12 Running: /opt/mtx/sbin/mtx status
> 11:01:12 Exit code: 0
> Stdout:
> Storage Changer /dev/sg2:1 Drives, 6 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Storage Element 2 Loaded)
> Storage Element 1:Full
> Storage Element 2:Empty
> Storage Element 3:Full
> Storage Element 4:Full
> Storage Element 5:Full
> Storage Element 6:Full
> 11:01:12 Config info:
> firstslot = "1"
> lastslot = "6"
> cleanslot = "-1"
> cleancycle = "120"
> offline_before_unload = "1"
> unloadpause = "0"
> autoclean = "0"
> autocleancount = "99"
> havereader = "0"
> driveslot = "0"
> poll_drive_ready = "3"
> max_drive_wait = "120"
> 11:01:12 WARNING -> current slot 2 not available, setting current slot to
> next slot (6)
> 11:01:12 LOADSLOT -> load drive 0 (/dev/nst0) from slot next
> 11:01:12 STATUS -> currently loaded slot = 2
> -> currently loaded barcode = ""
> 11:01:12 Exit (0) -> 2 /dev/nst0
> chg-zd-mtx: pid 2333 finish time Tue Jun 17 11:01:12 2003
to follow up on this myself if i try and use chg-zd-mtx manually it seems to
fail
$ ../../libexec/chg-zd-mtx -info
6 6 1
so then goto the first slot
$ ../../libexec/chg-zd-mtx -reset
1 /dev/nst0
which is right, so goto the next slot
$ ../../libexec/chg-zd-mtx -slot next
1 /dev/nst0
hmmmm it stays where it is and the debug shows
chg-zd-mtx: debug 1 pid 18459 ruid 11 euid 11: start at Tue Jun 17 11:22:19
2003
11:22:19 Arg info:
$# = 2
$0 = "../../libexec/chg-zd-mtx"
$1 = "-slot"
$2 = "next"
11:22:19 Running: /opt/mtx/sbin/mtx status
11:22:19 Exit code: 0
Stdout:
Storage Changer /dev/sg2:1 Drives, 6 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
Storage Element 1:Empty
Storage Element 2:Full
Storage Element 3:Full
Storage Element 4:Full
Storage Element 5:Full
Storage Element 6:Full
11:22:19 Config info:
firstslot = "1"
lastslot = "6"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "1"
unloadpause = "0"
autoclean = "0"
autocleancount = "99"
havereader = "0"
driveslot = "0"
poll_drive_ready = "3"
max_drive_wait = "120"
11:22:20 WARNING -> current slot 1 not available, setting current slot to
next slot (6)
11:22:20 LOADSLOT -> load drive 0 (/dev/nst0) from slot next
11:22:20 STATUS -> currently loaded slot = 1
-> currently loaded barcode = ""
11:22:20 Exit (0) -> 1 /dev/nst0
chg-zd-mtx: pid 18616 finish time Tue Jun 17 11:22:20 2003
|
|
|