I have a C5713A and this its my configuration,...

For cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: HP       Model: C5713A           Rev: H107
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 01
  Vendor: HP       Model: C5713A           Rev: H107
  Type:   Medium Changer                   ANSI SCSI revision: 02


For chg-scsi.conf i have this
cat /etc/amanda/Diario/chg-scsi.conf
number_configs  1
eject           1       # Tapedrives need an eject command
#eject          0       # Tapedrives need an eject command
sleep           90      # Seconds to wait until the tape gets ready
cleanmax        100     # How many times could a cleaning tape get used
changerdev      /dev/sg1
#
# Next comes the data for drive 0
#
config          0
drivenum        0
dev             /dev/nst0
scsitapedev     /dev/sg0
startuse        0       # The slots associated with the drive 0
enduse          4       #
statfile        /etc/amanda/Diario/tape0-slot  # The file where the actual 
slot is stored
cleancart       5       # the slot where the cleaningcartridge for drive 0 
is located
cleanfile       /etc/amanda/Diario/tape0-clean # The file where the 
cleanings are recorded
usagecount      /etc/amanda/Diario/totaltime
tapestatus      /etc/amanda/Diario/tapestatus # here will some status 
infos be stored
#labelfile      /etc/amanda/Diario/labelfile # Use this if you have an 
barcode reader

If anyone see a error please let me know,.. but work well.

Regards!!


On Thu, 20 Mar 2003, Mats Blomstrand wrote:

{Hi all.
{I have a HP C7200 (Dell powervault 128T) medium changer that i cant figure
{out how to talk to.  I have read the chg-scsi instructions but i havent managed
{to understand what to do other than the "big-picture". That doesnt help when
{it comes to details (the devil is in the details, someone wise said :) ).
{
{What device should i specify?
{
{Here is the systems view of the devices.
{       bash$ cat /proc/scsi/scsi
{       Attached devices: 
{       Host: scsi0 Channel: 00 Id: 00 Lun: 00
{         Vendor: HP       Model: C7200            Rev: 140D
{         Type:   Medium Changer                   ANSI SCSI revision: 03
{       Host: scsi0 Channel: 00 Id: 01 Lun: 00
{         Vendor: HP       Model: Ultrium 1-SCSI   Rev: E24V
{         Type:   Sequential-Access                ANSI SCSI revision: 03
{
{Or rather i should ask: How should i create the device?
{
{Background-info: First time amanda user, Intel PC, RH7.2
{//Mats
{