How to use FULL capacity - cart TRAVAN NS20 ?
2003-03-13 15:21:16
Hi frinds and Amanda User's ...
Please ... Look ... I'm user of cart model TRAVAN NS20 for Full_bkp's,
but I don't know why the taper don't use the full capacity of these
tapes (20Gb).
The max utilization is in 10Gb ...
========================================================================
Look the log:
=============
These dumps were to tapes AMF902, AMF903.
*** A TAPE ERROR OCCURRED: [[writing file: Input/output error]].
Some dumps may have been left in the holding disk.
Run amflush to flush them to tape.
The next 2 tapes Amanda expects to used are: AMF904, AMF901.
FAILURE AND STRANGE DUMP SUMMARY:
prods6.hc. //prods1/netlogon lev 0 STRANGE
prods6.hc. /nihc_var lev 0 STRANGE
prods6.hc. //samara/Projetos lev 0 STRANGE
prods6.hc. /vivian_httpd lev 0 STRANGE
prods6.hc. //samara/util lev 0 STRANGE
prods6.hc. //samara/util lev 0 FAILED [out of tape]
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 0:15
Run Time (hrs:min) 8:34
Dump Time (hrs:min) 4:32 4:32 0:00
Output Size (meg) 11351.0 11351.0 0.0
Original Size (meg) 18421.5 18421.5 0.0
Avg Compressed Size (%) 61.6 61.6 --
Filesystems Dumped 68 68 0
Avg Dump Rate (k/s) 711.8 711.8 --
Tape Time (hrs:min) 3:22 3:22 0:00
Tape Size (meg) 8636.1 8636.1 0.0
Tape Used (%) 43.8 43.8 0.0
Filesystems Taped 67 67 0
Avg Tp Write Rate (k/s) 728.7 728.7 --
. . .
NOTES:
driver: WARNING: /backup_full/amanda: 9437184 KB requested, but only
4734548 KB available.
taper: tape AMF902 kb 7807520 fm 67 writing file: Input/output error
taper: retrying prods6.hc.unicamp.br://samara/util_02.0 on new tape:
[writing file: Input/output error]
taper: tape AMF903 kb 2445792 fm 2 writing file: Input/output error
driver: going into degraded mode because of tape error.
. . .
DUMP SUMMARY:
DUMPER
STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS
KB/s MMM:SS KB/s
----------------------------------------
----------------------------------- ------------
prods6.hc //samara/util 0 3566602 2783369 78.0 38:57
1191.0 FAILED ----
. . .
==========================================================================================
Reply me how to increase total capacity size for this cart TRAVAN NS/20
... tks so much
what configuration I must to change/implement in amanda.conf ??
...........................
===>>> See how it is today:
...........................
#
tapedev "/dev/nst0"
#
tapetype DLT
#
define tapetype DLT {
comment "DLT - TRAVAN NS20 tape drives"
length 20000 mbytes # 20 Gig tapes
filemark 2000 kbytes # I don't know what this means
speed 1536 kbytes # 1.5 Mb/s
}
#
=========================================================
And ...
.... please ===>>>> what're these msg's:
1) -> *** A TAPE ERROR OCCURRED: [[writing file: Input/output error]].
2) -> prods6.hc. //samara/util lev 0 FAILED [out of tape]
=========================================================
Tanks so much,
Best regards,
Giuseppe Della Rigolletta
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- How to use FULL capacity - cart TRAVAN NS20 ?,
Prods6 - AMANDA - Bkp Mannager <=
|
|
|