> Does your kernel include "device sa"?
>
> Your tape should be recognized as /dev/.*sa[0-9]
>
> For instance :
>
> Waiting 5 seconds for SCSI devices to settle
> sa0 at ahc0 bus 0 target 5 lun 0
> sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device
> sa0: 10.000MB/s transfers (10.000MHz, offset 8)
> sa1 at ahc0 bus 0 target 10 lun 0
> sa1: <SEAGATE AIT 03j0> Removable Sequential Access SCSI-2 device
> sa1: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
>
Sa0 is included in the Kernel, but the only thing I get is:

pass0 at ahc0 bus 0 target 0 lun 0
pass0: <HP C7200 140D> Removable Changer SCSI-3 device
pass0: 3.300MB/s transfers

The system recognizes only a passthrough device.

Konni