locating backup images
2003-02-16 14:37:27
Hi again ;-)
Reading the text of the amadmin man page and its corresponding example, does it
mean that the backup of the 2000-11-06 is still on the holding disk disk (as
the tape or file is a tape label:000107) but that the one of 2000-11-07 was
already saved on tape? Aren't the backups put on that chronologically?
Just to reassure you, I'm going to put a doc online describing all my
discoveries so that other new users could look at it ;-)
Thanks
Raph
>From the man page
Locate backup images of /var from machine-c. The tape or file col
umn displays either a tape label or a filename depending on whether
the image is on tape or is still in the holding disk. If the image
is on tape, the file column tells you which file on the tape has
the image (file number zero is a tape label). This column shows
zero and is not meaningful if the image is still in the holding
disk. The status column tells you whether the backup was success
ful or had some type of error.
$ amadmin DailySet1 find machine-c /var
date host disk lv tape or file file st
2000-11-09 machine-c /var 0 000110 9 OK
2000-11-08 machine-c /var 2 000109 2 OK
2000-11-07 machine-c /var 2 /amanda/20001107/machine-c._var.2 0 OK
2000-11-06 machine-c /var 2 000107 2 OK
2000-11-05 machine-c /var 2 000106 3 OK
2000-11-04 machine-c /var 2 000105 2 OK
2000-11-03 machine-c /var 2 000104 2 OK
2000-11-02 machine-c /var 2 000103 2 OK
2000-11-01 machine-c /var 1 000102 5 OK
2000-10-31 machine-c /var 1 000101 3 OK
--
Free and Open Source Developers' European Meeting
http://www.fosdem.org
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- locating backup images,
rb <=
|
|
|