Thanks!!
Tim
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Tuesday, 01 May, 2012 1:36 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: server to server dbbackup
First define the server-to-server connection. Be sure to define it as a
node for the virtual-volumesfor the server you want to backup (source).
Source Server
DEFINE SERVER HADES serverpa=*** hla=IP-address-or-DNS lla=1500 pa=***
del=0 noden=HADES
Then do the same in reverse from the target server Node would be optional
unless you want to backup both directions:
Target Server
DEFINE SERVER EARTH serverpa=*** hla=IP-address-or-DNS lla=1500 del=0
On the target, define the node but be sure to define it as a SERVER, not
CLIENT. Also, you will need an appropriate PD/PS/ManagementClass with an
ARCHIVE copygroup since the "backups" are actually ARCHIVES.
Target Server
REGISTER NODE HADES *** archdel=YES type=Server backdel=YES dom=STANDARD
sessioninit=CLIENTORSERVER
On the Source server, define the DEVCLASS with devtype=server pointing to
the Target server
Source Server
DEFINE DEVCLASS HADES devt=server servern=EARTH maxcap=50G prefix=ADSM
mountr=60 mountl=1 retryp=10 retryi=30
If all goes well, the next step your the backup.
Source Server
BACKUP DB DEVCLASS=HADES TYPE=DBSNAPSHOT WAIT=NO
HTH
Zoltan Forray
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zforray AT vcu DOT edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html
From: Tim Brown <tbrown AT CENHUD DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: 05/01/2012 12:01 PM
Subject: Re: [ADSM-L] server to server dbbackup
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
Can someone share the basic definitions, dev classes, storage pools
To accomplish this , I am under the little hard to understand category.
I must be missing some pieces.
Thanks,
Tim
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Keith Arbogast
Sent: Tuesday, 01 May, 2012 8:01 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: server to server dbbackup
"Can tsm 6.3 be used to backup servera database to a location on another
tsm server serverb"
We have been writing full backups to a virtual volume pool on a remote
server for several years using server-to-server communication. The setup
is a little hard to understand, but easy to do.
Best wishes,
Keith Arbogast
|