Re: [ADSM-L] Help needed configuring TDP for Exchange2007 with VSS.

This sounds very close to the:
   ANS1353E (RC53)   Session rejected: Unknown or incorrect ID entered

This problem can be caused if the register node was not done correctly.
In order for proxy authority to work, you must have as admin node of
"Client Owner"
admin privilege for the DP/Exchange node.

This is normally done for you automatically when you issue the REGISTER
NODE command.
However.... if you used something like: REGISTER NODE nodename password
USERID=NONE
or if you used the GUI to define the NODE, the "admin" id may not have
been created.

To check this... on your TSM Server, issue the "QUERY ADMIN " command.
It should show something like this:


tsm: SERVER>q admin

Administrator     Days Since    Days Since   Locked?    Privilege Classes
Name             Last Access  Password Set
--------------  ------------  ------------  ----------
-----------------------
   CTNHEXMB01A               <1           134      No      Client Owner
   CTNHEXMB02A               <1           134      No      Client Owner
EXMB01E                   <1           134      No      Client Owner


If this is not the problem, the other thing to verify is that your
CAD Service is configured and running.


Thanks,

Del

----------------------------------------------------

"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> wrote on 02/18/2009
02:39:10 PM:

> [image removed]
>
> Help needed configuring TDP for Exchange2007 with VSS.
>
> Mcnutt, Larry E.
>
> to:
>
> ADSM-L
>
> 02/18/2009 02:41 PM
>
> Sent by:
>
> "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
> Please respond to "ADSM: Dist Stor Manager"
>
> TSM 5.5.2.0
> AIX 5.3
> BA client 5.5.1
> TDP for Mail 5.5.1
> Cluster nodes CTNHEXMB01A and CTNHEXMB02A
> Exchange client node EXMB01E
> tsm: FSPHTSM1>q proxy target=EXMB01E
>
> Target Node         Agent Node
> ---------------     -------------------
> EXMB01E             CTNHEXMB01A
>
> We apparently have some configuration problem.  When we try to run a
> local VSS backup from the agent node(CTNHEXMB01A), it always fails with
> "ANS1033E (RC-53)  An invalid TCP/IP address was specified."  We have
> tried looking at all the documentation, with no resolution.  I know this
> is not much information to go on, but I thought maybe this failure
> points to a specific problem.  There is so much configuration
> information involved, I preferred not to try to show it all, but will
> provide whatever is needed.  I also have a trace if that will help.
>
> Thanks,
> Larry McNutt
> The Timken Company
>
> -----------------------------------------
> This message and any attachments are intended for the individual or
> entity named above. If you are not the intended recipient, please
> do not forward, copy, print, use or disclose this communication to
> others; also please notify the sender by replying to this message,
> and then delete it from your system. The Timken Company / The
> Timken Corporation