This Export finally completed, however, I can't figure why it was
waiting so long for a volume.
(Waiting for input volume(s): B00580L3,(58779 Seconds))
Any ideas on where to look?
Two libraries, 20 LTO3 drives, There was not much happening at the time,
backups had completed
already.
TSM Server Version 5, Release 3, Level 3.3, IBM p570 server, 3584 and
L700 libraries
tsm: BAMBAM>q pro
Process Process Description Status
Number
-------- --------------------
-------------------------------------------------
702 EXPORT NODE ANR0648I Have copied the
following: 1 Nodes 5
Filespaces 801606 Backup Files
4912771
Megabytes (0 errors have been
detected).
Waiting for input volume(s): B00580L3,(58779
Seconds) Current input volume(s):
B00173L3,(13015 Seconds)
741 Space Reclamation Volume B00238L3 (storage pool
POOL_LTO3), Moved
Files: 464232, Moved Bytes:
1,620,848,964,960,
Unreadable Files: 0, Unreadable
Bytes: 0.
Current Physical File (bytes):
None Current
input volume: B00238L3. Current
output volume:
B00158L3.
754 Backup Storage Pool Primary Pool FRED_TAPE, Copy Pool
FRED_COPY,
Files Backed Up: 168008, Bytes
Backed Up:
391,447,466,918, Unreadable
Files: 0, Unreadable
Bytes: 0. Current Physical File
(bytes): None
Current input volume: C00763.
Current output
volume: C00047.
755 Backup Storage Pool Primary Pool POOL_LTO3, Copy Pool
LTO3_COPYPOOL, Files Backed Up:
0, Bytes
Backed Up: 0, Unreadable Files:
0, Unreadable
Bytes: 0. Current Physical File
(bytes):
1,954,392 Waiting for mount point
in device
class LTO3 (7669 seconds).
757 Migration Disk Storage Pool FRED_DISK, Moved
Files: 44020,
Moved Bytes: 72,083,398,656,
Unreadable Files:
0, Unreadable Bytes: 0. Current
Physical File
(bytes): None Current output
volume: C00559.
tsm: BAMBAM>q mount
ANR8330I LTO volume C00247 is mounted R/W in drive LTO3-04 (/dev/mt9),
status: IN USE.
ANR8330I LTO volume C00763 is mounted R/O in drive LTO3-07 (/dev/mt1),
status: IN USE.
ANR8330I LTO volume C00047 is mounted R/W in drive LTO3-02 (/dev/mt11),
status: IN USE.
ANR8330I LTO volume C00559 is mounted R/W in drive LTO3-00 (/dev/mt0),
status: IN USE.
ANR8330I LTO volume B00052L3 is mounted R/W in drive LTO2 (/dev/rmt5),
status: IN USE.
ANR8330I LTO volume B00071L3 is mounted R/W in drive LTO3 (/dev/rmt3),
status: IN USE.
ANR8330I LTO volume B00173L3 is mounted R/O in drive LTO1 (/dev/rmt6),
status: IN USE.
ANR8330I LTO volume B00238L3 is mounted R/O in drive LTO5 (/dev/rmt2),
status: IN USE.
ANR8330I LTO volume B00006L3 is mounted R/O in drive LTO4 (/dev/rmt1),
status: IN USE.
ANR8330I LTO volume B00180L3 is mounted R/W in drive LTO6 (/dev/rmt0),
status: IN USE.
ANR8330I LTO volume B00158L3 is mounted R/W in drive LTO0 (/dev/rmt4),
status: IN USE.
ANR8334I 11 matches found.
tsm: BAMBAM>q vol B00580L3 f=d
Volume Name: B00580L3
Storage Pool Name: POOL_LTO3
Device Class Name: LTO3
Estimated Capacity: 454,972.7
Scaled Capacity Applied:
Pct Util: 100.0
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 3
Write Pass Number: 1
Approx. Date Last Written: 03/18/08 09:03:08
Approx. Date Last Read: 03/17/08 17:22:24
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Volume is MVS Lanfree Capable : No
Last Update by (administrator):
Last Update Date/Time: 03/17/08 14:09:43
Begin Reclaim Period:
End Reclaim Period:
Thank you,
Bill Evans
|