ADSM-L

Re: TS3310 - Library Configuration - Help Required

2006-10-04 23:38:47
Subject: Re: TS3310 - Library Configuration - Help Required
From: TSM_User <tsm_user AT YAHOO DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 4 Oct 2006 20:37:07 -0700
Are you trying to label and LTO1 tape. A TS3310 only supports LTO3 drives.  
LTO3 drives can not write to LTO1 media.  Or, even if the tapes are LTO3 do 
they have LTO1 labels on them.  TSM will see the "L1" on the tape label and 
being that the LTO3 drives can't write to an L1 tape you can get the error no 
drives are available.
   
  K

Pranav Parikh <pparikh AT ONTRACKIN DOT COM> wrote:
  
Hi, 
  
We are in a process of upgrading our current TSM5.2 setup. 
  
Our current enviornment consist of following: 
  
1. TSM5.2 on x346 (Win2K /Sp4) 
2. 3582 SCSI Single drive Gen2 Autoloader 
3. BA CLient - 3 , TDP for Lotus Domino -1 
4.  100 MBps Network. Lan based backup 
  
Our new enviornment once set will look like: 
  
1. TSM 5.3.2 on HPBL20 Blade (Win2K3 / SP1). HP Blade consist of HBA QLA2312 
2. TS3310 with 2 Gen3 fiber drives connected to Baracoda SAN Switch 
3. All clients migrated on Blade center 
4. LAN Free Agents for existing clients. 
  
I am getting following error while lableing the volume. The storage device i.e 
library, drive and device configured using define command and path shows status 
good (Green). 
Error: 
  
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR2017I Administrator ADMIN issued command: LABEL libvol LTCLIB 
search=BULK labelsource=barcode overwrite=YES checkin=SCRATCH WAITTIME=0 
(SESSION: 112) 
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR0984I Process 13 for LABEL LIBVOLUME started in the BACKGROUND at 
14:20:09.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR8799I LABEL LIBVOLUME: Operation for library LTCLIB started as 
process 13.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR8447E No drives are currently available in library 
LTCLIB.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR8802E LABEL LIBVOLUME process 13 for library LTCLIB 
failed.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR0985I Process 13 for LABEL LIBVOLUME running in the BACKGROUND 
completed with completion state FAILURE at 14:20:19.(SESSION: 112, PROCESS: 13) 
  
  
Attached is the various logs which may be helpful to get furhter info on the 
setup. 
  
  
Request you to suggest if any what can be the problem with the configuration. 
Defining path communicate with library / drives and detects serial nos. 
  
Regards 
Pranav

                
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates 
starting at 1¢/min.

<Prev in Thread] Current Thread [Next in Thread>