ADSM-L

Re: TS3310 - Library Configuration - Help Required

2006-10-05 00:20:24
Subject: Re: TS3310 - Library Configuration - Help Required
From: Pranav Parikh <pparikh AT ONTRACKIN DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 5 Oct 2006 09:35:17 +0530
Thanks all of your for valueable inputs. After replacing L2 media we were 
able to resolve this problem. Problem was the media itself.

Regards
Pranav



TSM_User <tsm_user AT YAHOO DOT COM> 
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
10/05/2006 09:07 AM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
Re: [ADSM-L] TS3310 - Library Configuration - Help Required






Are you trying to label and LTO1 tape. A TS3310 only supports LTO3 drives. 
 LTO3 drives can not write to LTO1 media.  Or, even if the tapes are LTO3 
do they have LTO1 labels on them.  TSM will see the "L1" on the tape label 
and being that the LTO3 drives can't write to an L1 tape you can get the 
error no drives are available.
 
  K

Pranav Parikh <pparikh AT ONTRACKIN DOT COM> wrote:
 
Hi, 
 
We are in a process of upgrading our current TSM5.2 setup. 
 
Our current enviornment consist of following: 
 
1. TSM5.2 on x346 (Win2K /Sp4) 
2. 3582 SCSI Single drive Gen2 Autoloader 
3. BA CLient - 3 , TDP for Lotus Domino -1 
4.  100 MBps Network. Lan based backup 
 
Our new enviornment once set will look like: 
 
1. TSM 5.3.2 on HPBL20 Blade (Win2K3 / SP1). HP Blade consist of HBA 
QLA2312 
2. TS3310 with 2 Gen3 fiber drives connected to Baracoda SAN Switch 
3. All clients migrated on Blade center 
4. LAN Free Agents for existing clients. 
 
I am getting following error while lableing the volume. The storage device 
i.e library, drive and device configured using define command and path 
shows status good (Green). 
Error: 
 
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR2017I Administrator ADMIN issued command: LABEL libvol 
LTCLIB search=BULK labelsource=barcode overwrite=YES checkin=SCRATCH 
WAITTIME=0 (SESSION: 112) 
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR0984I Process 13 for LABEL LIBVOLUME started in the 
BACKGROUND at 14:20:09.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:09 PM GMT+05:30
 Message : ANR8799I LABEL LIBVOLUME: Operation for library LTCLIB started 
as process 13.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR8447E No drives are currently available in library 
LTCLIB.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR8802E LABEL LIBVOLUME process 13 for library LTCLIB 
failed.(SESSION: 112, PROCESS: 13) 
Date/Time : 9/28/06 2:20:19 PM GMT+05:30
 Message : ANR0985I Process 13 for LABEL LIBVOLUME running in the 
BACKGROUND completed with completion state FAILURE at 14:20:19.(SESSION: 
112, PROCESS: 13) 
 
 
Attached is the various logs which may be helpful to get furhter info on 
the setup. 
 
 
Request you to suggest if any what can be the problem with the 
configuration. Defining path communicate with library / drives and detects 
serial nos. 
 
Regards 
Pranav

 
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great 
rates starting at 1¢/min.

<Prev in Thread] Current Thread [Next in Thread>