Fwd: Re: Data tape in limbo
2006-04-05 10:06:43
That message would indicate that the physical hardware does not
recognize that the tape is in the library. I'm not familar with the
library that you are using so I can't help with how to run a physical
audit. I'd guess that you would do it from a control panel or console
on the library itself.
David
>>> dlcurrell AT YAHOO DOT COM 4/5/2006 9:33:23 AM >>>
An audit of the library:
ANR8457I AUDIT LIBRARY: Operation for library 4560SLX started as
process 18. (PROCESS: 18)
ANR8455E Volume 000035S could not be located during audit of
library
4560SLX. Volume has been removed from
thelibrary inventory.
ANR8461I AUDIT LIBRARY process for library 4560SLXcompleted
successfully.
ANR0985I Process 18 for AUDIT LIBRARY running in the BACKGROUND
completed with completion state SUCCESS
I am using 2 X IBM 4560 drives (slave and master) and the server is
running Suse 8. To my knowledge, there's no driver such as IBMTape that
could be used by Tapeutil, for example. The inventory function of the
library succeeds (on-panel diagnostics).
As far as copy pools go, I wish I had some ....
David E Ehresman <deehre01 AT LOUISVILLE DOT EDU> wrote: Date: Wed, 5
Apr 2006 09:14:28 -0400
From: David E Ehresman <deehre01 AT LOUISVILLE DOT EDU>
Subject: Fwd: Re: Data tape in limbo
To: ADSM-L AT VM.MARIST DOT EDU
It sounds to me like either the robots management software does not
know
the tape is in the library or that the tape's internal label is no
longer readable.
Have you done an audit library from the tape library's point of view,
not TSM's? If not, that is where I would start. If you do that,
follow
it with a tsm audit library.
If you've already done that, I would next repeat the audit volume
while
watch to see if the tape physically gets mounted into a drive. If it
does, it is time for a restore volume to recover the contents of the
tape from your copypool copy. After the restore volume, you can either
try a label libvol .. overwrite=yes or just replace the tape cart.
David
>>> dlcurrell AT YAHOO DOT COM 4/5/2006 8:45:56 AM >>>
I am able to check in the tape with
checkin libvol 4560SLX 000035S checklabel=no status=private
At that point, the tape is seen by noth 'q lib" and 'q vol'. I can
query contents but cannot audit the tape. Please see (and thanks).
tsm: FATMAN>q libvol 4560SLX 000035S f=d
Library Name Volume Name Status
------------ ----------- ----------
4560SLX 000035S Private
tsm: FATMAN>q vol 000035S f=d
Volume Name: 000035S
Storage Pool Name: TAPEPOOL
Device Class Name: SDLTC
Estimated Capacity (MB): 327,680.0
Scaled Capacity Applied:
Pct Util: 11.6
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 54.9
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 608
Write Pass Number: 1
Approx. Date Last Written: 01/18/06 11:13:29
Approx. Date Last Read: 06/21/05 08:59:31
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Volume is MVS Lanfree Capable : No
Last Update by (administrator): BUBBLES
Last Update Date/Time: 04/05/06 13:57:25
tsm: FATMAN>QUERY CONTENT 000035S NODE=* FILESPACE=* DAMAGED=ANY
COPIED=ANY
Node Name Type Filespace FSID Client's Name for
File
Name
--------- ---- ---------- ----
------------------------
JASMINE Bkup / 1 / bin
JASMINE Bkup / 1 / lib
JASMINE Bkup / 1 /dev/ allkmem
JASMINE Bkup / 1 /dev/ arp
JASMINE Bkup / 1 /dev/ bd.off
JASMINE Bkup / 1 /dev/ ce
JASMINE Bkup / 1 /dev/ conslog
JASMINE Bkup / 1 /dev/ console
JASMINE Bkup / 1 /dev/ dump
JASMINE Bkup / 1 /dev/ eri
JASMINE Bkup / 1 /dev/ openprom
JASMINE Bkup / 1 /dev/ pm
more... ( to continue, 'C' to cancel) c
Output to screen cancelled. Please wait for the 'tsm>' prompt.
tsm: FATMAN>audit volume 000035S
ANR2310W This command will compare all inventory references to
volume
000035S
with the actual data stored on the volume and will report any
discrepancies;
the data will be inaccessible to users until the operation
completes.
Do you wish to proceed? (Yes (Y)/No (N)) y
ANR2313I Audit Volume (Inspect Only) process started for volume
000035S
ANS8003I Process number 17 started.
ANR2017I Administrator BUBBLES issued command: AUDIT VOLUME
000035S
ANR1199I Removable volume 000035S is required for audit process.
ANR0984I Process 17 for AUDIT VOLUME (INSPECT ONLY) started in
the
BACKGROUND at 02:07:02 PM. (PROCESS: 17)
ANR2313I Audit Volume (Inspect Only) process started for volume
000035S (process ID 17). (PROCESS: 17)
ANR8355E I/O error reading label for volume 000035S in drive
SDLT_1
(/dev/tsmscsi/mt1). (PROCESS: 17)
ANR2017I Administrator BUBBLES issued command: QUERY ACTLOG
ANR8381E DLT volume 000035S could not be mounted in drive SDLT_1
(/dev/tsmscsi/mt1). (PROCESS: 17)
ANR1402W Mount request denied for volume 000035S - volume
unavailable.
ANR1410W Access mode for volume 000035S now set to "unavailable".
ANR2321W Audit volume process terminated for volume 000035S -
storage media inaccessible. (PROCESS: 17)
ANR0985I Process 17 for AUDIT VOLUME (INSPECT ONLY) running in
the
BACKGROUND completed with completion state
FAILURE
"Thorneycroft, Doug"
wrote: Date:
Tue, 4 Apr 2006 07:55:51 -0700
From: "Thorneycroft, Doug"
Subject: Re: Data tape in limbo
To: ADSM-L AT VM.MARIST DOT EDU
Have you tried to manually remove the tape from the library, run an
audit library,
then try the check it back in.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf
Of
Douglas Currell
Sent: Tuesday, April 04, 2006 7:17 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Data tape in limbo
I have, most certainly, mishandled some media and need some help to
put things together, if that is possible. I have a tape that is a
stgpool volume but is not a library volume:
q vol 000035S f=d
Volume Name: 000035S
Storage Pool Name: TAPEPOOL
Device Class Name: SDLTC
Estimated Capacity (MB): 327,680.0
Scaled Capacity Applied:
Pct Util: 11.6
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 54.9
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 608
Write Pass Number: 1
Approx. Date Last Written: 01/18/06 11:13:29
Approx. Date Last Read: 06/21/05 08:59:31
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Volume is MVS Lanfree Capable : No
Last Update by (administrator): BUBBLES
Last Update Date/Time: 04/04/06 09:49:15
'q libvol' output has no entries regarding the tape. An audit of the
library succeeeds. 000035S is physically in the library but can
neither
be checked in or checked out by TSM.
the volhistory says this about 000035S:
cat volhist.out | grep 000035S
2004/02/15 21:41:06 STGNEW 0 0 0 SDLTC 000035S
2004/02/24 16:17:47 STGDELETE 0 0 0 SDLTC 000035S
2004/03/02 20:33:37 STGNEW 0 0 0 SDLTC 000035S
2004/03/08 16:13:24 STGDELETE 0 0 0 SDLTC 000035S
2004/06/23 18:00:46 STGNEW 0 0 0 SDLTC 000035S
Any ideas??
thank you.....
---------------------------------
Make free worldwide PC-to-PC calls. Try the new Yahoo! Canada
Messenger
with Voice
---------------------------------
7 bucks a month. This is Huge Yahoo! Music Unlimited
---------------------------------
Make free worldwide PC-to-PC calls. Try the new Yahoo! Canada Messenger
with Voice
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Data tape in limbo, Douglas Currell
- Re: Data tape in limbo, Thorneycroft, Doug
- Re: Data tape in limbo, David E Ehresman
- Re: Data tape in limbo, David E Ehresman
- Fwd: Re: Data tape in limbo, Douglas Currell
- Fwd: Re: Data tape in limbo, David E Ehresman
- Fwd: Re: Data tape in limbo, Douglas Currell
- Fwd: Re: Data tape in limbo,
David E Ehresman <=
- Fwd: Re: Data tape in limbo, David E Ehresman
- Fwd: Re: Data tape in limbo, Bob Martoncik
|
|
|