Hi John!
I was just wondering how my bufpoolsize> region size? My region size is
512MB and my bufpoolsize is 270336KB which equals out to 264MB. Is that an
incorrect statement? I'm still trying to find the command to increase my
maxquickfree bytes. Does anyone know this command? As you can see, I'm in
need of increasing it... Thanks!
MAX initial storage 536870912 (512.0 MB)
Freeheld bytes 13592207 (13.0 MB)
MaxQuickFree bytes 10737418 (10.2 MB)
0 Page buffers of 13107 : 84 buffers of 1638.
12 Large buffers of 819 : 69 XLarge buffers of 102.
2375 buffers free: 71682 hiAlloc buffers: 51214 current buffers.
33689 units of 264 bytes hiAlloc: 33685 units of 264 bytes hiCur.
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************
"John Naylor"
<John.Naylor@SCOT
TISH-SOUTHERN.CO. To
UK> ADSM-L AT VM.MARIST DOT EDU
Sent by: "ADSM: cc
Dist Stor
Manager" Subject
<[email protected] Re: Server Performance decreasing
.EDU> rapidly: help!
01/27/2005 11:00
AM
Please respond to
"ADSM: Dist Stor
Manager"
<[email protected]
.EDU>
Joni,
Your bufferpool size is set higher than your region size, I did not know
you could do that
I would certainly look at increasing your region size, but you need to
check how much real memory is available in your lpar, and how much TSM is
actually using.
FWIW I am using a region size of 768 mb and BufPoolSize 49152
My database is however only one third as big as yours
Another thing not connected with cace hit is that you have CommTimeOut
600
Do you not get a lot of sessions failing with this value, mine is set at
3600
regards,
John
Joni Moyer <joni.moyer AT highmark DOT com>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT vm.marist DOT edu>
27/01/2005 15:43
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT vm.marist DOT edu>
To
ADSM-L AT vm.marist DOT edu
cc
Subject
Re: Server Performance decreasing rapidly: help!
The REGION is set to 512MB within the startup JCL. I didn't know what the
max. is for the region size, so I didn't change that. I will have to look
into increasing that as well. Thanks!
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************
"Joe Howell"
<JHowell@SHELTERI
NSURANCE.COM> To
Sent by: "ADSM: ADSM-L AT VM.MARIST DOT EDU
Dist Stor cc
Manager"
<[email protected] Subject
.EDU> Re: Server Performance decreasing
rapidly: help!
01/27/2005 10:23
AM
Please respond to
"ADSM: Dist Stor
Manager"
<[email protected]
.EDU>
What's your REGION set to on the startup jcl? We're using 768M, but then
we appear to be a smaller implementation than you based on your database
size.
#######################
Joe Howell
Shelter Insurance Companies
(573)-214-6534
jhowell AT shelterinsurance DOT com
Joni Moyer <joni.moyer AT HIGHMARK DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
01/27/2005 08:34 AM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
Server Performance decreasing rapidly: help!
Hey!
The performance on our TSM server is going down rapidly. It is on os/390
at level 5.2.2.5.
I have the following settings:
Server Option Option Setting Server Option Option Setting
----------------- -------------------- -----------------
--------------------
CommTimeOut 600 IdleTimeOut 90
BufPoolSize 135168 LogPoolSize 4096
DateFormat 1 (mm/dd/yyyy) TimeFormat 1 (hh:mm:ss)
NumberFormat 1 (1,000.00) MessageFormat 1
Language AMENG Alias Halt HALT
MaxSessions 300 ExpInterval 0
ExpQuiet No EventServer Yes
MirrorRead DB Normal MirrorRead LOG Normal
MirrorWrite DB Sequential MirrorWrite LOG Parallel
VolumeHistory 'SYS1.TSM.B1.VOLHIS- VolumeHistory
'SYS1.TSM.A1.VOLHIS-
T' T'
Devconfig 'SYS1.TSM.B1.DEVCON- Devconfig
'SYS1.TSM.A1.DEVCON-
F' F'
TxnGroupMax 256 MoveBatchSize 1000
MoveSizeThresh 2048 StatusMsgCnt 10
RestoreInterval 1,440 UseLargeBuffers Yes
DisableScheds No NOBUFPREfetch No
AuditStorage Yes REQSYSauthoutfile Yes
SELFTUNEBUFpools- Yes SELFTUNETXNsize No
ize
DBPAGEShadow No DBPAGESHADOWFile dbpgshdw.bdt
MsgStackTrace On QueryAuth None
LogWarnFullPerCe- 90 ThroughPutDataTh- 0
nt reshold
ThroughPutTimeTh- 0 NOPREEMPT ( No )
reshold
Resource Timeout 60 TEC UTF8 Events No
CommOpenTimeOut 20 TcpPort 1500
TcpAdminport 1500 TcpName TCPIP2
HttpTcpPort 1580 TECHost
TECPort 0 UNIQUETECevents No
UNIQUETDPTECeven- No IcsPort 1500
ts
ICSAdminport 1500 IcsSname *NONE*
PDMPort 1580 PDMName *NONE*
PDMConnect PDM TAPEIOBufs 1
UserExit FileExit
FileTextExit HttpIcsPort 1580
DeletionExit ARCTVEXT MsgSuppress *NONE*
LuName *NONE* Iucv *NONE*
RouteCode 11 MsgHilight *NONE*
MPThreading No TCPBufsize 32,768
HPDTenable Yes HPDTstorage ECSA
HPDTbuffer# 6 HPDTexpand# 2
NOLONG ( No )
The q db f=d is showing me that the cache hit% just keeps going down.
Available Space (MB): 116,320
Assigned Capacity (MB): 108,456
Maximum Extension (MB): 7,864
Maximum Reduction (MB): 16,804
Page Size (bytes): 4,096
Total Usable Pages: 27,764,736
Used Pages: 23,466,774
Pct Util: 84.5
Max. Pct Util: 84.5
Physical Volumes: 50
Buffer Pool Pages: 33,792
Total Buffer Requests: 50,768,552
Cache Hit Pct.: 97.63
Cache Wait Pct.: 0.00
And the Log Pool Pct. Util is greater than 0.
Available Space (MB): 11,636
Assigned Capacity (MB): 7,576
Maximum Extension (MB): 4,060
Maximum Reduction (MB): 7,244
Page Size (bytes): 4,096
Total Usable Pages: 1,938,944
Used Pages: 84,073
Pct Util: 4.3
Max. Pct Util: 5.7
Physical Volumes: 5
Log Pool Pages: 1,024
Log Pool Pct. Util: 0.57
What am I doing wrong? Any ideas? I am at a loss. Thank you in advance!
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************
===============================================
This e-mail is intended only for its addressee and may contain information
that is privileged, confidential, or otherwise protected from disclosure.
If
you have received this communication in error, please notify us
immediately
by
e-mail:
postmaster AT shelterinsurance DOT com, and delete the original message.
===============================================
**********************************************************************
The information in this E-Mail is confidential and may be legally
privileged. It may not represent the views of Scottish and Southern
Energy Group.
It is intended solely for the addressees. Access to this E-Mail by
anyone else is unauthorised. If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted
to be taken in reliance on it, is prohibited and may be unlawful.
Any unauthorised recipient should advise the sender immediately of
the error in transmission. Unless specifically stated otherwise, this email
(or any attachments to it) is not an offer capable of acceptance or
acceptance of an offer and it does not form part of a binding contractual
agreement.
Scottish Hydro-Electric, Southern Electric, SWALEC and S+S
are trading names of the Scottish and Southern Energy Group.
**********************************************************************
|
