On Monday 29 November 2004 22:25, Kauffman, Tom wrote:
> My original LTO-1 library went back to the leasing company after three
> years of use, averaging about 2 TB of data per DAY across 10 drives. In
> that time period, we clocked 11 uses of one cleaning tape. All eleven
> were manually triggered from the operator panel (move tape from slot to
> drive) to check out tape drives after repair/replace in the first two
> months (before we got the proper microcode installed on the drives).
>
> In other words -- 3 years, 2 TB/day * 365 days *3 -- and the drives
> never indicated they needed to be cleaned. And no I/O errors relating to
> cleaning being required.
I thought that you can not clean a lto drive if it isn't needed.  You can put 
the cleaning tape in, but it will not clean the drive.
Each cleaning tape also has a counter so you can only use it a few times (most 
tapes can be used 50 times).

Stef

-- 
stef.coene AT docum DOT org
 "Using Linux as bandwidth manager"
     http://www.docum.org/