I do have the latest ATAPE 8.2.5.0. Yes you do need it for it to define the
SMC0 media changer. I have loaded the AIX ML4 Maintenance Level. The drives
work fine with sysback and at the normal AIX level. It's just when I try to
setup the library. Thanks for your help for this Newbie at TSM :)

Scott






Quoting Dan Foster <dsf AT GBLX DOT NET>:

> Hot Diggety! Dan Foster was rumored to have written:
> > Hot Diggety! Scott Figgins was rumored to have written:
> > > I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5
> after
> > > defining a 7336-205 4mm Tape library. Any ideas? IBM says this library
> is
> > > supported in the BASE codeset.
> >
> > 2. What Atape version do you have?
>
> Er, I just realized that I'm not sure you need the Atape driver for a 7336,
> and most likely you don't need it. I've got an IBM 4mm library but last
> time we used it was about seven years ago when we did backups with Sysback.
>
> Do you have patches applied to AIX 5.1? Latest maintenance level is either
> ML3 or ML4.
>
> -Dan
>




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/