Re: STK L700 upgrade from 6 to 8 tape drives
2003-03-17 04:02:04
Tom,
have you tried a reboot with -r (reconfigure and rediscover)on the solaris
...
It should come up with the two extra drives ..
Cmdline;> reboot -- -r
Have also verified the scsi id's it seems to have some duplicates .. Which
is nevert good with scsi.
Regards
Marco Sjerps
-----Original Message-----
From: Tom Molloy [mailto:tmolloy AT COX DOT NET]
Sent: vrijdag 14 maart 2003 16:02
To: ADSM-L AT VM.MARIST DOT EDU
Subject: STK L700 upgrade from 6 to 8 tape drives
We just upgraded our STK L700 library from 6 DLT8000 drives to 8 DLT8000
drives. When reinstalling the TSM Solaris device drivers it only recognizes
6 of the 8 tape drives. It recognizes 1 of the new ones and drops one of the
preexisting ones. We verified that the tape drives where working from the
OS. Each sbus card controls 2 drives and has the target id's set to 1 and 0
on each card.
Anyone else had this problem?
Any help would be greatly appreciated.
Environment: TSM Server 5.1.5.1 - Sun Ultra Enterprise 4500, 4 GB RAM, OS:
Solaris 2.7, Library: Storage Tek L700, 8 - DLT8000 drives SCSI attached.
Thank You in advance.
Tom Molloy
Textron Financial Corporation
Information Systems
Email: tmolloy AT cox DOT net
|
|
|