Hi guys,
I'm running TSM 5.1.1.6  server on AIX 4.3.3 and have a DLT 7337 library
Every time when the server is restarted I'm getting this error in the system 
error log :


LABEL:          ADSM_DD_LOG4
IDENTIFIER:     4225DB66

Date/Time:       Fri Oct  4 17:18:04
Sequence Number: 41511
Machine Id:      0055C34A4C00
Node Id:         phobos
Class:           H
Type:            TEMP
Resource Name:   lb0
Resource Class:  library
Resource Type:   ADSM-SCSI-LB
Location:        17-08-00-6,0

Description
OPERATOR INTERVENTION REQUIRED

Probable Causes
ATTACHED SCSI TARGET DEVICE

Failure Causes
ATTACHED SCSI TARGET DEVICE

        Recommended Actions
        CORRECT THEN RETRY
        CHECK POWER
        CHECK PHYSICAL INSTALLATION

Detail Data
COMMAND
0606 0000 1600 0000 0000 0000 0000 0000
STATUS CODE
0000 0000
SENSE DATA
0102 0000 7000 0600 0000 000A 0000 0000 2900 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ERROR CODE
           0
RETURN CODE
           0
REFERENCE CODE
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000


I'm getting also an error for the library drive with the same sense key 
information.
According to Service Guide for the library, the error description is "Power-on 
reset or bus device reset occured".
Is this a normal bearing in case of server restart ??


TIA
Maria