okay, i do that exact command:
adsm> label libvol ITG-3575 search=bulk labelsource=barcode
checkin=scratch
and it starts to read all the labels in my library, but then it comes up
with the error:
ANR8314E Library ITG-3575 is full.
ANR8841I Remove volume from slot 30 of library ITG-3575 at your
convenience.
ANR8802E LABEL LIBVOLUME process 87 for library failed.
ANR0985I Process 87 for LABEL LIBVOLUME running in the BACKGROUND
completed
with completion state FAILURE at 15:28:48.
how can the library be full, i just removed 4 tapes from it yesterday! it
could be that the tapes were not properly removed, so the server "thinks"
it's full, even when it isn't.
so how do i get the server to read the tapes, and verify which ones are in
the library, and which ones arn't.
keep in mind that i have data on all these tapes, and i can't lose it!
thanks much for the help!
alex
--- ---
Alex Lazarevich | Systems | Imaging Technology Group
alazarev AT itg.uiuc DOT edu | (217)244-1565 | www.itg.uiuc.edu
--- ---
On Fri, 4 Oct 2002, John Coffman wrote:
>
> I was told by TSM support when I did my installation to label vol like
> this.... label libvol library_name search=bulk labelsource=barcode
> checkin=scratch
> (Embedded image moved to file: pic23281.pcx)
>
>
>
> Alexander
> Lazarevich To: ADSM-L AT VM.MARIST DOT
> EDU
> <alazarev AT HERA DOT ITG cc:
> .UIUC.EDU> Subject: Re: how to add tape
> to library? (fwd)
> Sent by: "ADSM:
> Dist Stor Manager"
> <[email protected].
> EDU>
>
>
> 10/04/2002 02:49
> PM
> Please respond to
> "ADSM: Dist Stor
> Manager"
>
>
>
>
>
>
> Dan,
>
> I'm sorry to bother you more, but I'm totally stuck on this, and you
> responded with great detail.
>
> I can remove the tapes just fine, but when I try to add a new one,
> per your instructions, here's what happens:
>
> adsm> label libvol ITG-3575 3121cf labelsource=barcode checkin=scratch
> ANR8812E LABEL LIBVOLUME: The SEARCH parameter is required when using
> LABELSOURCE with this command.
> ANS8001I Return code 3.
>
> So then I add the search parameter and I get this error:
>
> adsm> label libvol ITG-3575 3121cf labelsource=barcode checkin=scratch
> search=bulk
> ANR2020E LABEL LIBVOLUME: Invalid parameter - SEARCH.
> ANS8001I Return code 3.
>
> So it's as if I can't even run the label libv command at all? It wants
> the sarch param, then it doesn't. What the heck is going on here? Sounds
> like the program is screwed... sigh...
>
> I appreciate any help. Thanks,
>
> Alex
> --- ---
> Alex Lazarevich | Systems | Imaging Technology Group
> alazarev AT itg.uiuc DOT edu | (217)244-1565 | www.itg.uiuc.edu
> --- ---
>
>
> On Tue, 1 Oct 2002, Dan Foster wrote:
>
> > Hot Diggety! Alexander Lazarevich was rumored to have written:
> > >
> > > I am unable to add a new tape to the library, and I just can't figure
> out
> > > what I'm doing wrong. Can someone give me some tips? We've got an IBM
> 3575
> > > L18 tape library, runing adsm server 3.1 on an AIX 4.3.3 machine. Tape
> >
> > I've got a 3575-L32 library, 4 drives, ADSM 3.1, AIX 4.3.3.
> >
> > > # move all data off the tape, the remove it.
> > > adsm> checkout libvolume ITG-3575 xxxxxx checklabel=no
> > > adsm> reply 001
> >
> > BTW, the checkout doesn't move any data off it. It just simply
> > tells TSM "hey, it's no longer in the library right now" but still
> > has all the data on it defined in the TSM DB and stuff.
> >
> > If you really want to move data off it... can do something like:
> >
> > adsm> q vol <volser>
> >
> > This will tell you what storage pool that tape belongs to.
> >
> > adsm> move data <volser> -stgpool=<name of stgpool tape is in>
> >
> > That will move the data off that tape and onto another tape in the
> > same storage pool. THEN you can do this:
> >
> > adsm> delete vol <volser> -discarddata=yes
> >
> > That tells TSM "hey, there's gonna be nothing left of interest on the
> > tape when you finish with that delete vol".
> >
> > THEN:
> >
> > adsm> checkout libvol ITG-3575 <volser> checklabel=no remove=yes
> >
> > That tells TSM "ok, tape isn't in the 3575 any more. Forget it ever
> > existed".
> >
> > At this point, you can now remove the tape from the 3575 library.
> >
> > Now insert a new tape. Then, you need to do an one-time-only tape
> > labelling process if it's a brand new tape that's never been used
> > before:
> >
> > adsm> label libvol ITG-3575 <volser> labelsource=barcode checkin=scratch
> >
> > That will both label it *and* then tell TSM that it's now in the
> > ITG-3575 library and available for use. (You can do this as two
> > separate steps but it's bit of a pain...so it's nice to have a single
> > command like label libvol that can do both steps and save you some
> > typing and PITA-ness.)
> >
> > Finally, to verify that it's now in the library and as a scratch tape:
> >
> > adsm> q libv ITG-3575 <volser>
> >
> > Enjoy your 3575 setup. :-) I'm now working on the 3584 setup...3 to 10
> > times faster, and instead of 339 Magstar tapes (3575), the equivalent
> > capacity is 9 LTO tapes (3584), and I got 1600 LTO tapes. Whoo hoo ;)
> >
> > -Dan
> >
>
>
>
>
> The content of this email message and any attachments are confidential and
> may be legally privileged, intended solely for the addressee. If you are not
> the intended recipient, be advised that any use, dissemination, distribution,
> or copying of this e-mail is strictly prohibited. If you receive this
> message in error, please notify the sender immediately by reply email and
> destroy the message and its attachments.
>
>
|