3583 Ultrium Tape Library and SAN Data Gateway
2001-02-22 05:43:32
Subject: |
3583 Ultrium Tape Library and SAN Data Gateway |
From: |
Rosy Specchia <rosy.specchia AT IAN DOT IT> |
Date: |
Thu, 22 Feb 2001 11:26:06 +0100 |
Hi *SM-ers!
We are trying to install TSM 4.1.2 on Windows Nt SP 6.
The Server has a Qlogic card QLA2200F which is attached to SAN Data Gateway
Router 2108/R03 scsi connected to a 3583 Ultrium library.
Windows NT is able to see the SDG and the library and the drives are detected.
We are able to use the single drive with NT Backup.
When we try to label or checkin a new tape using TSM Server we have the
following error message:
02/20/2001 16:31:06 ANR8300E I/O error on library LB0.1.0.3 (OP=8401C058,
CC=314, KEY=05, ASC=3B, ASCQ=0E,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.0E.E2.00.00-
.00., Description=The source slot or drive was empty
in
an attempt to move a volume). Refer to Appendix D in
the
'Messages' manual for recommended action.
02/20/2001 16:31:06 ANR9999D mmsscsi.c(10293): Could not move volume from
slot
16 to slot 256.
02/20/2001 16:31:06 ANR8841I Remove volume from slot 16 of library
LB0.1.0.3
at your convenience.
02/20/2001 16:31:06 ANR8832E CHECKIN LIBVOLUME for volumes in search mode
in
library LB0.1.0.3 failed.
Someone know to solve this problem???
Regards
Rosy Specchia
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- 3583 Ultrium Tape Library and SAN Data Gateway,
Rosy Specchia <=
|
|
|