Help Please !!!
                I currently have a 3466 Network Storage Manager  running AIX
4.3 and ADSM server code 3.1.2.13
                3494 Tape robot with 5 3590B drives with compression
switched on.

                I am trying to find out storage information regarding
tapepool (onsite) and copypool (offsite)
                storage pools. My problem is the amount of data ADSM thinks
is stored on some tapes,
                With 3590b's 10 Gb capacity 3:1 compression ratio approx,
                max of 30Gb on a tape depending on type of data.

                However when i check storeage pool volumes i get Estimated
capacity upto 147Gb on some tapes !!!!
                How can i tell how much data ADSM is holding on these tapes
correctly.
                I have done a Query Occ & Query Auditocc but this
information is extracted from
                the ADSM database using the storage pool information??????
Any ideas please

Regards,
Keith Etherington,
Snr Software Analyst,
Global Technical Services,
Room 1/148, Eagle Way,
Warley, Brentwood,
Essex, CM13 3BW

E-Mail        ketherin AT ford DOT com
Telephone  +44 (0)1277-253038
Fax             +44 (0)1277-253603





      Mit freundlichen Grüßen


      Roger Hohmann

      WestLB
      Division: 009 Services
      Abteilung: 001-80633
      Herzogstraße 15
      D - 40217 Düsseldorf
      Tel.: +49211 826 8155
      mailto:roger_hohmann AT westlb DOT de


--0__=ZMygqgMIDXvFuE3dqPurFdGQRaVBer2mthl1WQPz3wbsIFJVNP6gNCzx--
=======================================================================