Re: 3590 driver for IBM S70
1999-05-27 14:14:51
Hi,
lslpp -L shows the Atape driver to be pesent and committed.
However, errpt shows scsi bus errors, probable causes:
CABLE
CABLE TERMINATOR
DEVICE
ADAPTER
Guess its diag time...
Jim
> ----------
> From: rbs AT bu DOT edu[SMTP:rbs AT bu DOT edu]
> Sent: Thursday, May 27, 1999 1:57 PM
> To: james_purdon AT merck DOT com
> Subject: 3590 driver for IBM S70
>
> Good info. It looks like the driver install was no good.
> Did it seem to give good results? Does an 'lslpp -L <DriverName>'
> show the software there? Does a 'cfgmgr' command either cause the
> drives to be configured or yield an error?
> You may want to probe via SMIT and see what it thinks of those.
>
> Also check the drives (their control panels) to assure that they got
> the SCSI IDs they should have; are not in any funny mode; are cabled
> to the host SCSI adapter securely; etc. You may want to use the AIX
> 'diag' command to try accessing the drives.
>
> A drivers diskette should have come with the drives with the proper
> level of code on it. If not, your CE should find out why not.
> I think your best best is to pursue the driver install and SMIT,
> looking for any errors. Check 'errpt', particularly after running
> 'cfgmgr'.
> Richard
>
|
|
|