Re: 3590 driver for IBM S70
2015-10-04 17:43:36
Hi,
Here's what happens:
# lsdev -C -c tape -t 3590
#
# lsdev -C -c tape
rmt0 Available 20-60-00-5,0 SCSI 8mm Tape Drive
lmcp0 Available LAN/TTY Library Management Control Point
#
# lscfg
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sysplanar0 00-00 System Planar
+ mem0 00-00 Memory
+ proc0 00-00 Processor
+ L2cache0 00-00 L2 Cache
* pmc0 00-00 Power Management Controller
+ proc1 00-01 Processor
+ proc2 00-02 Processor
+ proc3 00-03 Processor
* pci0 00-f8400000 PCI Bus
* isa0 10-78 ISA Bus
+ fda0 01-D1 Standard I/O Diskette Adapter
+ fd0 01-D1-00-00 Diskette Drive
* siokma0 01-K1 Keyboard/Mouse Adapter
+ sioma0 01-K1-01 Mouse Adapter
+ ppa0 01-R1 Standard I/O Parallel Port Adapter
+ lp0 01-R1-00-00 Other parallel printer
+ sa0 01-S1 Standard I/O Serial Port
+ tty0 01-S1-00-00 Asynchronous Terminal
+ sa1 01-S2 Standard I/O Serial Port
+ tty1 01-S2-00-00 Asynchronous Terminal
* pci1 00-f8500000 PCI Bus
+ scsi7 20-58 Wide/Fast-20 SCSI I/O Controller
+ scsi1 20-60 Wide SCSI I/O Controller
+ cd0 20-60-00-4,0 SCSI Multimedia CD-ROM Drive (650
MB)
+ rmt0 20-60-00-5,0 SCSI 8mm Tape Drive (20000 MB)
+ ssa1 20-68 IBM SSA Enhanced RAID Adapter
(14104500)
* pci2 00-f8600000 PCI Bus
+ fddi2 30-58 SysKonnect PCI FDDI Adapter
(48110040)
+ ssa2 30-70 IBM SSA Enhanced RAID Adapter
(14104500)
* pci3 00-f8700000 PCI Bus
+ scsi5 40-58 Wide SCSI I/O Controller
+ hdisk1 40-58-00-1,0 16 Bit SCSI Disk Drive (4500 MB)
+ ses0 40-58-00-14,0 SCSI Enclosure Services Device
+ ses1 40-58-00-15,0 SCSI Enclosure Services Device
+ scsi8 40-60 Wide/Fast-20 SCSI I/O Controller
* pci4 00-f8c00000 PCI Bus
+ ssa4 50-58 IBM SSA Enhanced RAID Adapter
(14104500)
+ scsi9 50-60 Wide/Fast-20 SCSI I/O Controller
* pci5 00-f8d00000 PCI Bus
+ ssa5 60-58 IBM SSA Enhanced RAID Adapter
(14104500)
+ scsi10 60-60 Wide/Fast-20 SCSI I/O Controller
+ ent0 60-70 IBM 10/100 Mbps Ethernet PCI Adapter
(23100020)
* pci6 00-f8e00000 PCI Bus
+ scsi11 70-58 Wide/Fast-20 SCSI I/O Controller
+ fddi3 70-68 SysKonnect PCI FDDI Adapter
(48110040)
* pci7 00-f8f00000 PCI Bus
+ sa2 80-60 IBM 8-Port EIA-232/RS-422A (PCI)
Adapter
+ tty2 80-60-01-00 Asynchronous Terminal
* hdisk2 30-70-L SSA Logical Disk Drive
* hdisk3 30-70-L SSA Logical Disk Drive
* hdisk4 30-70-L SSA Logical Disk Drive
* hdisk5 30-70-L SSA Logical Disk Drive
* hdisk6 30-70-L SSA Logical Disk Drive
* hdisk7 30-70-L SSA Logical Disk Drive
* hdisk8 30-70-L SSA Logical Disk Drive
* hdisk9 30-70-L SSA Logical Disk Drive
+ pdisk0 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk1 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk2 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk3 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk4 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk5 30-70-P SSA Physical Disk Drive (9100 MB)
+ pdisk6 30-70-P SSA Physical Disk Drive (9100 MB)
#
There's simply no sign of the drives at all. As far as we can tell, they are
turned on and powered up.
Jim
> ----------
> From: rbs AT bu DOT edu[SMTP:rbs AT bu DOT edu]
> Sent: Thursday, May 27, 1999 1:28 PM
> To: james_purdon AT merck DOT com
> Subject: 3590 driver for IBM S70
>
> Jim - Specifics? Did you go through SMIT to install the configure
> the tape driver and drives? When you do:
> lsdev -C -c tape -t 3590
>
> do you get status showing the drives, like:
>
> rmt1 Available 00-01-01-0,0 IBM 3590 Tape Drive and Medium Changer
> rmt2 Available 00-01-01-1,0 IBM 3590 Tape Drive and Medium Changer
> rmt3 Available 00-02-01-0,0 IBM 3590 Tape Drive and Medium Changer
> rmt4 Available 00-02-01-1,0 IBM 3590 Tape Drive and Medium Changer
>
> What does lscfg show?
>
> Richard Sims, BU (3494, 3590 drives)
>
|
|
|