Folks,
OK, I need the big guns!
I need to know what AIX error number 6 is and also any ideas about what
could be causing the problem. Remember my earlier post today re. the 3575
and the bulk i/o port. Perhaps a connection?
TIA,
This is the error message:
09/10/98 18:13:56 ANR8779E Unable to open drive /dev/rmt0, error
number=6.
09/10/98 18:14:01 ANR8300E I/O error on library 3575
(OP=00006C03,CC=207,
KEY=05, ASC=2C, ASCQ=00,
SENSE=70.00.05.00.00.00.00.0A.0-
0.00.00.00.2C.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0-
0.00.00.00.00.00.00.00.00.00.00.00.00.00.,
Description=Device is not in a state capable of performing
request).
Refer to Appendix B in the 'Messages' manual for
recommended action.
09/10/98 18:14:01 ANR1404W Scratch volume mount request denied - mount
failed.
Kelly Lipp
Storage Solutions Specialists, Inc.
lipp AT storsol DOT com
www.storsol.com
(719) 531-5926
|