you need to be at level 15 for 3570 support

Mark A. Adams
UNIX SYSTEMS ADMINISTRATOR
(402) 963-7369 Office
(402) 444-0754 Pager
Communications Marketing Services
SITEL Corporation
7444 Farnam
Omaha, NE 68114

>-----Original Message-----
>From:  Somchai Tachapornroong [SMTP:somchait AT TH.IBM DOT COM]
>Sent:  Sunday, November 16, 1997 8:11 AM
>To:    ADSM-L AT VM.MARIST DOT EDU
>Subject:       Re: 3570 Tape setting up
>
>Hi Martin,
>
>               Now, I have 7336 Tape library configured on the ADSM
>machine. I
>want to replace this one with 3570.
>I replace 3570 with 7336. I installed Atape 3.1.1.0. After I reboot
>system, I
>can not see /dev/rmt2.smc. I saw only /dev/rmt2 and /dev/rmt3 (rmt0,
>rmt1 is
>defined to my 8mm (internal tape) and 4mm (7336 drive). I think this
>might because level of Atape? Which level do you apply. One more, my
>AIX is
>4.2.0 and ADSM is V2.1 level 12.
>
>Best Regards,
>Somchai Tachapornroong
>IBM Thailand, IGS, Strategic Outsourcing Services
>E-mail somchait AT th.ibm DOT com, Tie line 166 (273-4859), Fax 273-0557
>
>
>
>
>
>ADSM-L AT VM.MARIST DOT EDU on 11/14/97 05:25:38 PM
>Please respond to ADSM-L AT VM.MARIST DOT EDU @ internet
>To: ADSM-L AT VM.MARIST DOT EDU @ internet
>cc:
>Subject: Re: 3570 Tape setting up
>
>
>Somchai Tachapornroong (somchait AT th.ibm DOT com) wrote:
> >Anyone ever config 3570 Tape drive (2 drives) with ADSM. I don't know
>how
> to
> >config it (3570) library
> >Although I already install latest ATape driver.
>
> I assume that you run ADSM at a RS/6000 (AIX).
> After installing ATape and rebooting you get a new device
>/dev/rmt0.smc.
>(or /dev/rmt1.smc ...). This is the System Media Changer.
> You will get a /dev/rmt0 and a /dev/rmt1 for the two tape drives in
>the
>library.
> Check that the library is NOT in split mode!
> At the dsmadmc prompt you can now:
>
> def libr 3570lib libtype=scsi device=/dev/rmt0.smc
> def drive 3570lib 3570drive0 device=/dev/rmt0
> def drive 3570lib 3570drive1 device=/dev/rmt1
> def devc 3570class devtype=3570 library=3570lib mountlimit=2
>
> Hope that this will help you.
>
> --
> Martin Kompf
> mailto: mkm AT sysdat DOT de
>
>
>