Hello list! I have a Netview 7.1.5 fp0004 installed on a Linux box and something's been bothering me for quite a while: Most of the device's IPs are in a 10.0.0.0 network, and sometimes when a new
Author: Francois Le Hir <flehir AT ca.ibm DOT com>
Date: Wed, 7 Jul 2010 13:48:23 -0400
It all depend of the snmp access to the device that has an ip in the subnet. If there is no snmp access, then netview will assume the mask of the subnet based on the class of the subnet. 10.x is a cl
I will be out of the office starting 01/07/2010 and will not return until 12/07/2010. I will respond to your message when I return on the 12th July, 2010. If you have an urgent enquiry please contact
Author: manabjyoti saikia <jyotimanab AT gmail DOT com>
Date: Thu, 8 Jul 2010 12:56:06 +0530
Hello List, I have Tivoli Netview version V7.1.5 installed in windows server 2003 with MsSql server 2000. Thoght It discovered all the nodes via SNMP , when I open IP Internet option I found
Hello Francois, Thanks for your reply! You're right! All of these equipments are nor responding to SNMP polls. But why does it happen only to some SNMP-unresponsive devices? There are quite a few
Author: Francois Le Hir <flehir AT ca.ibm DOT com>
Date: Thu, 8 Jul 2010 07:52:26 -0400
If a good subnet already exists, the new nodes that get discovered will automatically be connected to it. If you can not solve the snmp access, and you have at least one device with snmp access for e
Author: "Amir, Mohammed - Corporate Core - ICT Services" <Mohammed.Amir AT Oxfordshire.gov DOT uk>
Date: Thu, 8 Jul 2010 13:16:09 +0100
Hi, Please could I be take me off this list as we no longer have use of Tivoli products. Many thanks. Kind Regards, Mohammed Amir Senior Systems Engineer Oxfordshire County Council ICT Corporate
WAN Insight is NOT a Tivoli product. It is provided by a third-party vendor called Netsol. I would check your SNMP access to the unconnected devices. Use snmpwalk from the command line or the MIB bro
If you can not solve the snmp access, and you have at least one device with snmp access for each subnet, a solution is to get all these devices with snmp access discovered first so that the subnets w
Hi folks, For some reason the NetView box won’t snmpwalk this, yet NetQoS and Solarwinds can walk/query just fine. NetView can walk other devices with no problem, so at this point unsure if it&
I will be out of the office starting 21/07/2010 and will not return until 02/08/2010. I currently have intermittent email access however will endeavour to reply to your message at the earliest opport
Author: Pablo Cerezo Alonso <cerezoalonso AT gmail DOT com>
Date: Thu, 13 May 2010 17:27:08 +0200
Hello again List, Firts of all I would like to thank James for having answered so quickly. Having lost all the hope of getting a similar file to location.conf in OpenView, I started to make the locat
It has been a while since I used this, but it does work well once you understand the limitations. 1) The first thing to do is to check the error log. There may be some messages in it that help you un
Author: "Davis, Donald" <donald.davis AT firstcitizens DOT com>
Date: Thu, 13 May 2010 18:05:27 -0400
Pablo, You have not specified which container to put the 172.29.126.0 objects into because you want to split them between two containers. You cannot do that. You cannot split a single subnet (172.29.
All, I'd like to know how NetView selects an IP address for field "SNMP ipAddress" for a device with multiple NICs. Once it assigns an address to that field, will it ever switch to a different addres
Unless you force a particular address using the seed file, netmon will try all the IP addresses on the machine in turn until one responds. It marks that one the SNMP ipAddress and will try that one a
Author: Francois Le Hir <flehir AT ca.ibm DOT com>
Date: Fri, 21 May 2010 16:01:51 -0400
I think there is also an option in netmon.conf to take the device loopback ip by default Salutations, / Regards, Francois Le Hir Network Projects & Consulting Services IBM Global Technology Services
Yes, in NetView 7.1.5 the SNMP address can be locked to the loopback addresses for all nodes in the netmon.conf file. Or you can lock individual ones in the netmon seed file. As for when it is change
Author: Pablo Cerezo Alonso <cerezoalonso AT gmail DOT com>
Date: Wed, 28 Apr 2010 17:08:55 +0200
Hello List, This is my first attempt here in the list. I had hear nothing about Netview till last week and I have been asked to investigate how to extract information from a map made in HP Openview a
It's an old and common misconception that since OpenView and NetView shared a common code base at one time that they are interchangeable. But they haven't shared any code since NetView Version 2 debu