Author: Roland Kastner <Roland_Kastner AT symantec DOT com>
Date: Tue, 5 Nov 2013 07:36:38 -0800
Hi Simon, you can change the Barcode reading direction on the GUI of the ESL tape Library (left to right) Mit freundlichen Grüßen/With kind regards Roland Kastner From: veritas-bu-bounces AT mailman
Author: Simon Weaver <Simon.Weaver AT iscl DOT net>
Date: Tue, 5 Nov 2013 15:40:52 +0000
Ronald Do you know how to on this G3 ESL, because I have gone through the Manual and I cannot see anything about it, and HP is saying it is a NetBackup issue, but I keep stating it is not :( From: ve
Author: Roland Kastner <Roland_Kastner AT symantec DOT com>
Date: Tue, 5 Nov 2013 07:47:12 -0800
Hi Simon, this should be on the Setup Menu, Barcode length. To set the barcode length, use the Up and Down buttons to select Barcode Length and press Select. Next, use the Up and Down buttons to disp
Author: "Reuter, Jerry" <Jerry.Reuter AT bausch DOT com>
Date: Tue, 5 Nov 2013 11:18:09 -0500
_______________________________________________ Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Author: Simon Weaver <Simon.Weaver AT iscl DOT net>
Date: Tue, 5 Nov 2013 16:46:23 +0000
Hi Roland I don't have physical access to the library. I tried the JAVA HP ESL console but see nothing there. It's a 300 mile trip, so would be nice to fix remotely. Do u have this in an Admin book f
Author: Simon Weaver <Simon.Weaver AT iscl DOT net>
Date: Tue, 5 Nov 2013 17:59:49 +0000
All I finally found a resolution to the problem. There is a hidden feature within an area called partitioning where you can define the prefix, suffix or disabled section of the barcode!! Sure enough
Author: Simon Weaver <Simon.Weaver AT iscl DOT net>
Date: Tue, 5 Nov 2013 19:23:45 +0000
Hi Jerry Yes you are right. We probably will, but right now after over 10 years of setup, it has worked out quite well, and wanted to keep it consistent with the rest of the environment. But it is wo
Author: Rusty Major <rusty.major AT sungard DOT com>
Date: Tue, 5 Nov 2013 13:28:45 -0600
Hi Jerry Yes you are right. We probably will, but right now after over 10 years of setup, it has worked out quite well, and wanted to keep it consistent with the rest of the environment. But it is
Author: "Stier, Matthew" <Matthew.Stier AT us.fujitsu DOT com>
Date: Tue, 5 Nov 2013 22:09:49 +0000
However, you are short changing yourself. With using the last 6 characters, you are throwing two away two, and limiting yourself to 4 unique characters. The last two characters signify the type of ta
Author: Michele MATURO <michele.maturo AT quotium DOT com>
Date: Wed, 6 Nov 2013 03:30:06 +0000
Hi All, to celebrate our anniversary we are giving free of charge health and performance checking of your tape back up tapes and drives our software does monitor quality and performances and does roo
Author: Simon Weaver <Simon.Weaver AT iscl DOT net>
Date: Wed, 6 Nov 2013 07:27:36 +0000
Hi Matthew Not really. Like I said, its been working this way for 10 years, plus the plan is to move to disk next. So it keeps things consistent and what the company wants. Plus root cause was the Ro
Author: Anurag Sharma <sharma.anurag AT hotmail DOT com>
Date: Wed, 6 Nov 2013 19:38:38 +0530
All, I followed the following technote to create a new exclude list http://www.symantec.com/business/support/index?page=content&id=TECH30603 The name format of the exclude list is exclude_list.NEW_PO
Author: Justin Piszcz <jpiszcz AT lucidpixels DOT com>
Date: Wed, 6 Nov 2013 09:54:45 -0500
HI, The easiest way? Run a full backup with ALL_LOCAL_DRIVES and make sure what you excluded is excluded from the host's backups (attempt restore thereafter, make sure the files are not included). An
Author: "Infantino, Joe" <JINFANTINO AT intersil DOT com>
Date: Wed, 6 Nov 2013 15:57:23 +0000
I don't have a script, but the vmoprcmd might be what you are looking for. It is in {NetBackup install directory}/volmgr/bin. I am running Windows so I am not sure of the capitalization. Joe Infantin
Author: "Lightner, Jeff" <JLightner AT water DOT com>
Date: Fri, 8 Nov 2013 21:08:16 +0000
Is anyone using NetBackup vaulting and sending to a vendor OTHER THAN Iron Mountain (e.g. Recall). If so how does one modify vaulting to generate ftp files for that other vendor? Athena®, Created for
Author: Dennis Peacock <nbu-forum AT backupcentral DOT com>
Date: Mon, 11 Nov 2013 17:48:56 -0800
AIX 7.1 boxes. Node A - Master/Media server with fiber attached LTO-5 library. Node B - Media server/client with tape drives in the Node-A library zoned so Node B can see the drives. Setup a regular
Hi Dennis Try to create the volmgr logs under volmgr/debug and put verbose in vm.conf Sometimes a manually start of ltid from the prompt can give an indication of the problem My guess from what you w
Author: Anurag Sharma <sharma.anurag AT hotmail DOT com>
Date: Tue, 12 Nov 2013 17:34:56 +0530
Thanks for your input guys. > Date: Wed, 6 Nov 2013 09:54:45 -0500 > Subject: Re: [Veritas-bu] How to verify if unix exclude list is working ? > From: jpiszcz AT lucidpixels DOT com > To: sharma.anur
Author: Dennis Peacock <nbu-forum AT backupcentral DOT com>
Date: Tue, 12 Nov 2013 08:47:14 -0800
ltid starts just fine manually. +-- +-- _______________________________________________ Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu http://mailman.eng.auburn.edu/mailman/listinfo/v
Author: Dennis Peacock <nbu-forum AT backupcentral DOT com>
Date: Tue, 12 Nov 2013 08:57:47 -0800
Out of the job detail log: 11/12/2013 10:07:26 - current media KC0063 complete, requesting next media Any 11/12/2013 10:28:34 - Waiting for scan drive stop IBM.ULT3580-TD5.002, Media server: node-B 1