Author: "Lakka, Rajesh Kumar" <Rajesh.Lakka AT in.unisys DOT com>
Date: Mon, 1 Dec 2008 17:59:01 +0530
Thanks for the replies Francois and James Shanks. Francois, I think I have to implement the way you have explained below, I need some more information on this automatic action scripting. Where do we
Well, I'd start with the NetView documentation. This is not a trivial exercise. According to the nv-l archives you are using NetView for Windows. In the User's Guide, read over Chapter 6, Working wit
Author: "Rumsey, Robert" <Robert.Rumsey AT actewagl.com DOT au>
Date: Tue, 2 Dec 2008 14:10:19 +1100
Thanks for your reply. These nodes can be managed/unmanaged in the usual manner. The object properties appears to be normal. Demand poll is not available as only ping is enabled in the test menu. The
Author: Giovanni Santa <giovanni.santa AT it.ibm DOT com>
Date: Tue, 2 Dec 2008 09:35:32 +0100
Hi All do you have the SNMP protocol enabled? the devices are NATed? Giovanni "Rumsey, Robert" <Robert.Rumsey AT actewagl.com DOT au> Sent by: nv-l-bounces AT lists.ca.ibm DOT com 12/02/2008 04:10 AM
Well, then you need to talk to support because they should not be blue if you can ping them successfully using the drop down test menu James Shanks Tivoli Network Availability Management Level Three
Hi folks, Wondering if someone has a suggestion for why a trap from the Dialogic device itself that reads fine in trapd.log would not make it through nvserverd processing, yet a test trap I send usin
Are you sure that there is only one entry in trapd.conf for this trap and that it is NOT set to "Log Only"? Then tracing is your only option. If you are sure that it is not in the nvserverd.log then
Thanks Jamesthats what I was looking for. Looks like its time to turn tracing on and work with Dialogic. Also have FP03 installing in the lab. Are you sure that there is only one entry in trapd.conf
Author: "Lakka, Rajesh Kumar" <Rajesh.Lakka AT in.unisys DOT com>
Date: Thu, 4 Dec 2008 20:02:18 +0530
James, Thanks for your reply, tried the below mentioned procedure. Incoming trap original trap was 11234 with the same OID .1.3.6.1.4.1.3183.1.1 For the above original trap action command was given a
Rajesh, 1. My scripts execute fine as hidden applications. I don't have any idea why yours do not. You will need to pursue that in a PMR if that's what you want. But I should think console applicatio
Hello Stephanie, I got only the direct copy of this note though I am subscribed to the nv-l list. But the address I use is nv-l AT lists.ca.ibm DOT com, so perhaps that is why. You do know that netmo
Author: Franck Mercier <franck.mercier AT fr.ibm DOT com>
Date: Mon, 22 Dec 2008 20:10:31 +0100
I will be out of the office starting 18/12/2008 and will not return until 02/01/2009. _______________________________________________ NV-L mailing list NV-L AT lists.ca.ibm DOT com Unsubscribe:NV-L-l
Author: Jane Curry <jane.curry AT skills-1st.co DOT uk>
Date: Fri, 07 Nov 2008 16:31:04 +0000
The global Tivoli User Group body has a webcast on November 19th entitled "Upgrading from TEC/Netview to the new Event and Network Management solution". For details and registration please go to http
Author: Jane Curry <jane.curry AT skills-1st.co DOT uk>
Date: Wed, 19 Nov 2008 15:05:42 +0000
Did anyone else find the webcast today a little short on NETWORK MANAGEMENT details?? Lots of other products to entice us with but I ended up with more questions than answers. Has anyone else tried r
Author: "Lakka, Rajesh Kumar" <Rajesh.Lakka AT in.unisys DOT com>
Date: Mon, 24 Nov 2008 12:04:29 +0530
Hi, I am receiving a trap as follows on the Tivoli netview 7.1.5. Received at the destination as follows: Source: 192.62.182.203 Timestamp: 3408 hours 44 minutes 46 seconds Enterprise: .1.3.6.1.4.1.3
Author: Francois Le Hir <flehir AT ca.ibm DOT com>
Date: Mon, 24 Nov 2008 08:08:52 -0500
Hi Rajesh, The only way I know of is to call a script automatically when this trap is received (automatic action - configured in trapd.conf or via xnmtrap) and have the script break the data the way
Are you asking whether we can translate the octet string into readable (English) ASCII? If so, then the answer is "yes". The problem with this varbind is that it is padded with hex nulls (0x00) throu
Author: "Rumsey, Robert" <Robert.Rumsey AT actewagl.com DOT au>
Date: Wed, 26 Nov 2008 14:27:10 +1100
I'm running Netview 7.1.4 on Windows. We have some remote nodes connected via VPN. Netview discovers them and can ping them but their status is always 'unknown' How can I get the status to update cor
I think you should open a PMR to support. Your question requires investigation and cannot be answered until it is determined what is the matter at hand. Unknown or blue status means that the nodes ar
Author: "Davis, Donald" <donald.davis AT firstcitizens DOT com>
Date: Thu, 9 Oct 2008 10:43:18 -0400
Has anyone seen these messages in syslog on the NetView server? AIX5.3 TL06 SP03 NV7.1.5 SP3 Oct 9 08:21:31 dcncsrvrmsq30 user:notice root: 1 new errors have been found on dcncsrvrmsq30 , PROGRAM NAM