Réf. : Re: [NV-L] Trap OSPF
2008-06-10 09:17:09
I have change the definition of the trap to make it a
Status Event, and then set the status to critical. But the node is
still green on the map.
The help topic says that i should use the netview specific
trap snmp_ev but i don t know how to use it.
| Leslie Clark <lclark AT us.ibm DOT com>
Envoyé par : nv-l-bounces AT lists.ca.ibm DOT com
10/06/2008 13:22
Veuillez répondre à Tivoli NetView Discussions
|
Pour
: Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
cc
: (ccc : Khaled ATCHEKZAI/CN2I/GRT/FR)
Objet
: Re: [NV-L] Trap OSPF |
By design, the node and interface status reflected in
the map is IP status, unmodified by any traps received. You can alter that
if you wish, but be aware that a change in IP status will override your
status.
I'm not positive of the menu selections on the windows
platform any more, but you can change the definition of the trap to make
it a Status Event, and then set the status. Really, the design of the product
is that you should create some object of your own, and change its status,
but it works well enough, I think, just changing the status of the node
that sent the trap. I suggest setting it to Marginal. You will need to
know the Enterprise number and the Generic and Specific trap ids for the
exact trap you want to modify. If there is a clearing event, (like a down
and an up), you can set the status back to Normal.
For an operator to clear the status that was set by an
incoming trap, you only need to Acknowledge/Unacknowledge the node. That
will restore the status to the IP status.
Cordially,
Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager
"Khaled ATCHEKZAI" <khaled.atchekzai AT RTE-FRANCE DOT COM>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
06/10/2008 05:16 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| nv-l AT lists.ca.ibm DOT com
|
cc
|
|
Subject
| [NV-L] Trap OSPF |
|
Hi
I am working with netview 7.1.4 on a W2K station.
I'would like to know how to change the status of a router
when i recive an OSPF trap when my router lose a neigbors.
I am able to issue the command nvecho when I recive the
trap and it works fine. The probleme is that my router is sill green on
the map because all its interfaces are up. How can I change its status
of the router so the color of the router change to red on the map.
Thanks _______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser
access limited to internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|