Also, when you enable tracing for nvserverd,
any events that are set to log only, or do not display or log, will not
hit nvserverd at all. But you should see startup messages for nvserverd
in that log. If there is a problem contacting the TEC, it will show there.
Also, I'm not sure what that LCF is
in there for. If you are using the nvserverd adapter, you should not need
that, I don't think.
Also, the location of TEC caching is
different depending on your version. You can specifiy that path in tecint.conf
in BufEvtPath
Here's one I've used.
ServerLocation=hostname1.yourdomain.com,hostname2.yourdomain.com
TecRuleName=TEC_ITS.rs
ServerPort=0
DefaultEventClass=TEC_ITS_BASE
BufferEvents=YES
UseStateCorrelation=YES
StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml
## The following four lines are for
debugging the state correlation engine
# LogLevel=ALL
# TraceLevel=ALL
# LogFileName=/usr/OV/log/adptlog.out
# TraceFileName=/usr/OV/log/adpttrc.out
## The following three lines alter
nvserverd default behavior
NvserverdTraceTecEvents=YES
# NvserverdPrimeTecEvents=NO
NvserverdSendSeverityTecEvents=YES
Cordially,
Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager
"Lodge, Mabel"
<Mabel.Lodge AT cw DOT com>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
06/09/2008 11:17 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| "Tivoli NetView Discussions"
<nv-l AT lists.ca.ibm DOT com>
|
cc
|
|
Subject
| RE: [NV-L] Netview 7.1.4 No events in
workspace but there in trapd.log |
|
I am also getting the pop up
error on my GUI that nvevents server daemon is unable to connect to nvserverd
and that I should start nvserverd daemon. But the nvserverd daemon is running
when I check with ovstatus. Restarting it also did not help.
I uncommented #
NvserverdTraceTecEvents=YES in the tecint.conf but see nothing being
written in nvserverd.log.
Also, my /usr/OV/app-defaults/Nvevents is
same as the as-shipped version.
Regards,
Mabel Honey
Lodge
Mob - +91 99860
26874
-----Original Message-----
From: nv-l-bounces AT lists.ca.ibm DOT com [mailto:nv-l-bounces AT lists.ca.ibm DOT com]
On Behalf Of Lodge, Mabel
Sent: 09 June 2008 12:15
To: nv-l AT lists.ca.ibm DOT com
Subject: [NV-L] No events in workspace but there in trapd.log
Hi,
I do not see any events in my Netview Events
workspace although I see them in /usr/OV/log/trapd.log as well as in Event
History.
The events are not being forwarded to TEC
either. The tecint.conf looks ok and TEC server is fine.
Tecint.conf :
ServerLocation=@EventServer
TecRuleName=Prod.rs
ServerPort=0
DefaultEventClass=TEC_ITS_BASE
Type=LCF
BufferEvents=YES
UseStateCorrelation=YES
StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml
## The following four lines are for debugging
the state correlation engine
# LogLevel=ALL
# TraceLevel=ALL
# LogFileName=/usr/OV/log/adptlog.out
# TraceFileName=/usr/OV/log/adpttrc.out
## The following three lines alter nvserverd
default behavior
# NvserverdTraceTecEvents=YES
# NvserverdPrimeTecEvents=NO
# NvserverdSendSeverityTecEvents=YES
## LCFINSTANCE=1
Any idea what else should I check?
Regards,
Mabel Honey
Lodge
Sr Project Engineer
Tivoli and Automation
Support
Cable &
Wireless
Mob - +91 99860
26874
This e-mail has been scanned for viruses by the Cable & Wireless e-mail
security system - powered by MessageLabs. For more information on a proactive
managed e-mail security service, visit http://www.cw.com/uk/emailprotection/
The information contained in this e-mail is confidential and may also be
subject to legal privilege. It is intended only for the recipient(s) named
above. If you are not named above as a recipient, you must not read, copy,
disclose, forward or otherwise use the information contained in this email.
If you have received this e-mail in error, please notify the sender (whose
contact details are above) immediately by reply e-mail and delete the message
and any attachments without retaining any copies.
Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ
This e-mail has been scanned for viruses by the Cable & Wireless e-mail
security system - powered by MessageLabs. For more information on a proactive
managed e-mail security service, visit http://www.cw.com/uk/emailprotection/
The information contained in this e-mail is confidential and may also be
subject to legal privilege. It is intended only for the recipient(s) named
above. If you are not named above as a recipient, you must not read, copy,
disclose, forward or otherwise use the information contained in this email.
If you have received this e-mail in error, please notify the sender (whose
contact details are above) immediately by reply e-mail and delete the message
and any attachments without retaining any copies.
Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|