Re: [NV-L] Application port monitoring
2008-04-10 09:56:57
You got our best answer already.
You said you had two servers you could
monitor successfully and one you could not. If you did not have to
do anything on the other two servers to get monitoring to work, then why
would you ask us if something is missing in their configuration? Get
the configs for the ones that work and compare them with the ones that
don't. If you don't have access, ask whomever in your organization
does.
And if that doesn't help, turn on the
tracing in the manner we already suggested. In fact I would do that
first and see what servmon says. Restart him if you have to.
If you still can't figure it out, then
you'll have to open a problem with IBM Support.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
"fairoze k" <fairoze2002 AT gmail DOT com>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
04/10/2008 02:15 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| "Tivoli NetView Discussions"
<nv-l AT lists.ca.ibm DOT com>
|
cc
|
|
Subject
| Re: [NV-L] Application port monitoring |
|
Do i have to enable anything from server (Application:EAI)
side?
On Thu, Apr 10, 2008 at 11:35 AM, fairoze k <fairoze2002 AT gmail DOT com>
wrote:
Sorry its
isService_EAI|9089 EAI|EAI|EAI|||*|5
On Wed, Apr 9, 2008 at 11:40 PM, James Shanks <jshanks AT us.ibm DOT com>
wrote:
One of my colleagues who is much more experienced with
servmon than I am
suggested I post this response.
First make sure that the servmon.conf files are same on all servers.
If not copy, servmon.conf from a working server to the production system;
then restart servmon.
You said..
isService_EAI|9089 EAI|EAI|EAI|||*5
Do you mean to say...
isService_EAI|9089 EAI|EAI|EAI|||*|5
(See the vertical bar before the 5?)
Check your servmon file and make sure it is isService_EAI|9089
EAI|EAI|
EAI|||*|5.
Correct it, if it is error; then restart servmon.
If that still fails, then turn on servmon debug and check servmon.log file
for any errors.
Edit /usr/OV/conf/servmon-log4j.propreties.
Change
log4j.category.com.tivoli.netview.servmon=MIN#com.tivoli.netview.log4j.NvLevel
to
log4j.category.com.tivoli.netview.servmon=MAX
#com.tivoli.netview.log4j.NvLevel.
Restart servmon.
Then review /usr/OV/log/servmon.log file.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
"fairoze k"
<fairoze2002@gmai
l.com>
To
Sent by:
nv-l AT lists.ca.ibm DOT com
nv-l-bounces@list
cc
s.ca.ibm.com
Subject
[NV-L] Application
port monitoring
04/09/2008 06:15
AM
Please respond to
Tivoli NetView
Discussions
<nv-l AT lists.ca DOT ib
m.com>
Hi List,
I am monitoring port 9089 on 3 servers (Production, DR and Test)
Servmon.conf
isService_EAI|9089 EAI|EAI|EAI|||*5
But I am receiving port down event only from DR and Test.
I am not receiving port down event from Production
Can anyone help me resolve this issue
Thanks and Regards
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l
(Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l
(Browser access limited to internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|