Re: [NV-L] TCP Port monitoring for particular hosts

Looks like that should work.
Cheers,
Jane

sudha g wrote:
> Hi,
> Thanks for your valuable inputs.
> I think UDP port monitoring is supported only from Netview 7.1.5.
>  
> I have created a smartset like
> *Name:*
> *"Remedy" *
> *Description:*
> *"For Remedy Web Application"*
> *Rule:*
> *('IP Address'  = '10.16.32.11 <http://10.16.32.11>')*
>  
> Then, i have this entry in my servmon.conf file,
>  
> *isRemedy|8080|Remedy|Remedy Web Server|||Remedy|5*
> ** 
> *The above configuration will monitor the port 8080 on server
> 10.16.32.11 <http://10.16.32.11>?*
> ** 
> Do we need to restart the server via *ovstop ovstart* commands after
> changing the entries in servmon.conf file?
>  
>  
> Thanks!
> Sudha
>  
>
>
>  
> On 7/5/07, *Jane Curry* <jane.curry AT skills-1st.co DOT uk
> <mailto:jane.curry AT skills-1st.co DOT uk>> wrote:
>
>     As Senthil says, you need a SmartSet with the devices you want to
>     discover running a service on port 8080.  The * that you have in the
>     next-to-last field in your example below, is what you replace.  If
>     this
>     field is * then it says "test all systems that NetView knows
>     about"; if
>     this field is the name of an existing SmartSet, then discovery of
>     your
>     port 8080 will be limited to the devices in that SmartSet.
>
>     Once devices are discovered, they are added to the SmartSet you have
>     specified in the 3rd field (Remedy). Devices in this Remedy
>     SmartSet are
>     then status-polled according to the last parameter - 5 minutes in
>     your
>     example.  You do not need the "Remedy" immediately following the
>     8080 in
>     your second field - if you are doing simple port testing, then you
>     simply specify the port number to be tested for - this port will
>     default
>     to TCP (you can put u after the port to force a UDP check but I doubt
>     that is what you want).
>
>     Cheers,
>     Jane
>
>     sudha g wrote:
>     > Hi,
>     >
>     > I'm trying to monitor my application through port monitoring of
>     > netview. My application runs in port 8080.
>     > So i added an entry in servmon.conf file like this
>     >
>     > *isService_Remedy|8080 Remedy|Remedy|Remedy|||*|5
>     > *
>     > But, Netview tries to scan all my network/servers and add the
>     servers
>     > which has port 8080.
>     > I want to monitor the port 8080 for only two hosts say
>     10.16.32.11 <http://10.16.32.11>
>     > <http://10.16.32.11> and 10.18.32.1 <http://10.18.32.1>
>     <http://10.18.32.1>
>     >
>     > Any inputs is highly appreciated.
>     >
>     > thnx
>     > Sudha
>     >
>     ------------------------------------------------------------------------
>
>     >
>     > _______________________________________________
>     > NV-L mailing list
>     > NV-L AT lists.ca.ibm DOT com <mailto:NV-L AT lists.ca.ibm DOT com>
>     > Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
>     <mailto:Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com>
>     > http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access
>     limited to internal IBM'ers only)
>     >
>
>     --
>     Tivoli Certified Consultant & Instructor
>     Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK.
>     Registered in England & Wales, Company No. 3458854.
>     Tel: +44 (0)1628 782565
>     Copyright (c) 2007 Jane Curry < jane.curry AT skills-1st.co DOT uk
>     <mailto:jane.curry AT skills-1st.co DOT uk>>.  All rights reserved.
>
>     _______________________________________________
>     NV-L mailing list
>     NV-L AT lists.ca.ibm DOT com <mailto:NV-L AT lists.ca.ibm DOT com>
>     Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
>     <mailto:Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com>
>     http://lists.ca.ibm.com/mailman/listinfo/nv-l
>     <http://lists.ca.ibm.com/mailman/listinfo/nv-l> (Browser access
>     limited to internal IBM'ers only)
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> NV-L mailing list
> NV-L AT lists.ca.ibm DOT com
> Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
> internal IBM'ers only)
>   

-- 
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK.
Registered in England & Wales, Company No. 3458854.
Tel: +44 (0)1628 782565
Copyright (c) 2007 Jane Curry <jane.curry AT skills-1st.co DOT uk>.  All rights 
reserved.

_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)