nv-l
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [nv-l] Browsing MIB IBMServeRAID,

2006-05-23 04:59:33
Subject: RE: [nv-l] Browsing MIB IBMServeRAID,
From: j.chaussinand AT b-a-w DOT com
To: nv-l AT lists.tivoli DOT com
Date: Tue, 23 May 2006 10:56:47 +0200

I did your test and it's ok but I already tested it before.

So snmpget and snmpwalk are working, but not for the subtree 1.3.6.1.4.1.2.6.167

I've got a few questions :

- you say to try to do snmpwalk or snmpget from another computer, so I deduct that loading the MIB on the NetView server is not useful for using these commands since for you it should work ?
- so the private MIBs are only useful to the NetView server to describe the datas received from a private monitored node and use them , am I right ?


I tell you what I did :

Installed Netview 7.14 and the FP4 on an old IBM server with 4 Xeons and 2Gb of ram running a Windows 2000 Server. I have it installed and running on a 2003 Server on a laptop too...
I installed the Windows SNMP agent and Serveraid Manager on a few servers. I let the community name public, the read only access and allowed to receive SNMP packets from any hosts.

I need to understand from what point a "snmpwalk -c public myserver .1.3.6.1.4.1.2.6.167" should work.
From the moment I installed the SNMP agent on the targeted server ? From the moment I installed Serveraid Manager on it ?

Thanks for you massive help ;-)
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [nv-l] Switch Analyzer Problem, Usman Taokeer
Next by Date:  RE: [nv-l] Browsing MIB IBMServeRAID,, Denis Peuziat
Previous by Thread:  [nv-l] Switch Analyzer Problem, Usman Taokeer
Next by Thread:  RE: [nv-l] Browsing MIB IBMServeRAID,, Denis Peuziat
Indexes:  [Date] [Thread] [Top] [All Lists]