|
RE: [nv-l] % cpu utilization
2005-09-19 13:02:17
|
Am sure the answer here is yes, but I have to ask - can you
do a simple demand poll or snmp query? I have had one problem where I had
a $ in my comm string and it only worked with certain queries. You might
try a temp comm string for testing too? Lastly, have you setup the
appropriate snmp parameters on the PIX? See sample below - be sure your
nearest interface to the Netview is specified. If you have access to
the pix, I believe there is a debug SNMP command, if not you could do a debug
packet on the interface in question with Netview as the src and your pix
interface as the dst.
snmp-server host INTERFACE_NAME ip_addr
snmp-server
location XXXXXX
snmp-server contact YYYYYY
snmp-server community ZZZZZZZ
snmp-server enable
traps
Hope this helps,
Glen Warn
PEMCO Corporation Computer Services
(PCCS)
206-628-5770
Hi all,
I am running netview 7.1.4
windows-2003
I am successfully monitoring the cpu
utilization of all my pix firewall version 6.3 in one of my pix the utilization
is showing always zero .I do not know why ,would anyone help me in trouble
shooting this problem
True regards,
Praveen
|
|
|
|
