nv-l

Re: [nv-l] How to discover VPN & Remote Router?

2005-06-08 03:33:20
Subject: Re: [nv-l] How to discover VPN & Remote Router?
From: Jane Curry <jane.curry AT skills-1st.co DOT uk>
To: nv-l AT lists.us.ibm DOT com
Date: Wed, 08 Jun 2005 08:32:15 +0100
If you need to add lots of machines "manually" then look at the loadhosts command. It is a scripted way of manually adding several nodes to the NetView database.
Cheers,
Jane

Anvaj A B wrote:

Thanks glen and I have tried this usual force discovery (Seed file and pinging), but not getting discovered on the map. Do we have another mechanism to add a device manually and start monitoring on NetView?

Best regards,

Anvaj

------------------------------------------------------------------------

*From:* owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com] *On Behalf Of *Glen Warn
*Sent:* Monday, June 06, 2005 11:16 PM
*To:* nv-l AT lists.us.ibm DOT com
*Subject:* RE: [nv-l] How to discover VPN & Remote Router?

We have several similar issues. Have you tried adding those hostnames or IP addresses to the seedfile? If not, you can access it by going to Options - Netmon Seed Editor. Highlight set initial discovery seeds - then hit add and either enter the IP or the hostname (make sure it's the "nearest hop" interface though). Just hit save and answer yes when asked to update the network monitor. Try a ping a few seconds later and typically it will appear. I've had many nodes on the back side of firewalls and VPNs where this is the only way to get them discovered.

Glen Warn

PEMCO Corporation Computer Services (PCCS)

glen.warn AT pemcocorp DOT com <mailto:glen.warn AT pemcocorp DOT com>

206-628-5770

------------------------------------------------------------------------

*From:* owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com] *On Behalf Of *Anvaj A B
*Sent:* Monday, June 06, 2005 6:03 AM
*To:* nv-l AT lists.us.ibm DOT com
*Subject:* [nv-l] How to discover VPN & Remote Router?

Hi,

I am running Netview 7.1.4 with FP03 on win2k Server. I have a Router and Firewall to monitor at the remote location

My NMS can reach (ping and snmp) these devices through a VPN (Cisco PIX 515 to Router 2611) and I am able to do ping and SNMP-Walk on these devices. But I am not able to discover these devoices on my NetView MAP by following the usual methods (seed file, pining etc). Also my VPN connectivity from the local PIX (This is displaced on the MAP) to remoter router is also not displayed.

Please share your thoughts on the force discovery or possible problems.

Best regards,

**Anvaj Aliyarukutty**

Global Network Operations Center (GNOC)

**US Technology**

Nila, Technopark

Phone : +91 471 233 5777 ext 8651

Mobile: +91 944 772 8103


--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2005 Jane Curry <jane.curry AT skills-1st.co DOT uk>.  All rights 
reserved.