[nv-l] Authorization Failure - format Error

2005-05-23 01:22:18
Subject: [nv-l] Authorization Failure - format Error
From: "Anvaj A B" <anvaj.aliyarukutty AT ustri DOT com>
To: <nv-l AT lists.us.ibm DOT com>
Date: Mon, 23 May 2005 10:52:46 +0530


I am using Netview 7.1.4 FP03 on Win2K Server.  I am getting quite lot of authorization failure from one of my Cisco PIX 515E firewall.  But from the message I am not able to find out the IP address of the device which is trying to access. I have checked the snmp configuration on NetView for this device and found everything correct, and Polling the device with correct string.


Below is the message. How will I identify the source IP?


authenticationFailure trap received from enterprise cisco with 0 arguments:  authAddr=FMT ERROR: accessing element #1, only 0 available




Best regards,


Anvaj Aliyarukutty

Global Network Operations Center (GNOC)

US Technology

Nila, Technopark

Phone : +91 471 233 5777 ext 8651

Mobile: +91 944 772 8103


<Prev in Thread] Current Thread [Next in Thread>