In addition, I'm having an issue setting up the MIB data collection that
I'm hoping someone has a quick answer to. I've followed the steps in the
Admin Guide, but can't seem to get this to work.
This is Netview 7.1.4 on AIX 4.3.3:
So far I've done the following:
I have a Solaris server running snmpd.
I seeded it and verified it was added to the map
I can do a test SNMP GET on it fine.
I loaded a MIB, host-resources-mib.mib, to collect against.
I configured Collection on a basic MIB value, sysUpTime, set it to
Collect, 5m freq, All instances, Store without Thresholds.
I right-clicked and selected "Manage" on the server object
When I look at snmpCol.trace, the data collection never begins, instead it
says:
Fri May 20 15:11:19 2005 : Initializing for data collection...
Fri May 20 15:11:19 2005 : Nothing to collect. If you expect data to be
collected, check that the nodes selected for collection
support SNMP, are up and managed, respond to SNMP, and that
the configured collections are correct and not suspended.
I triple-checked all of the configuration, and restarted snmpCollect,
netmon several times, and also did an ovstop/kill OV processes/ovstart to
be sure. Still getting the same message in snmpCol.trace.
What am I missing?
TIA,
Justin Eagleson
JPMorganChase Global Technology Infrastructure
Systems and Service Management Tools
office: 614-213-9017
pager: 877-864-2056
cell: 614-226-1148
Justin Eagleson
justin_eagleson AT bankone DOT com
Sent by: owner-nv-l AT lists.us.ibm DOT com
05/20/2005 10:12 AM
Please respond to nv-l
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] MIB data collection questions
Thanks again Leslie, Channing and everyone else who reply directly and
through the mail list. Your real-life experiences are invaluable.
Thanks and regards,
Justin Eagleson
JPMorganChase Global Technology Infrastructure
Systems and Service Management Tools
office: 614-213-9017
pager: 877-864-2056
cell: 614-226-1148
Justin Eagleson
Leslie Clark <lclark AT us.ibm DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
05/19/2005 09:23 PM
Please respond to nv-l
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] MIB data collection questions
You did not say what platform you are running on. I can only really
address Unix (AIX). As for scalability, I think the capacity limitation is
more on the devices being polled than on the Netview server. How busy are
they, and how much data can they spit out given the timeouts and retries
you specify. A few mib variables every 5 minutes can be a lot what with
today's devices having hundreds of interfaces. Many of the values you are
likely to want to poll are mib expressions like bandwidth utilization,
involving several mib variables, so that's another multiplier.
Netview does a nice job of combining the requests into bundles, and can
limit the size of the request, making multiple trips if necessary. This
makes it relatively efficient.
If you are talking hundreds of devices with hundreds of interfaces each
and want to poll in the 5 minute range, I would not feel positive. In the
15 minute range, I'd say maybe, if the box is big enough for everything
else going on. For thousands of devices and only a couple of mib values
every 15 minutes, that's probably ok too.
I have seldom seen the snmpCollect daemon hogging the cpu unless something
silly was configured.
I will say, however, that I am finding it less usable these days for data
collection on high-speed interfaces. The Counter32 datatypes it supports
cannot handle the rollovers. In fact, at some sites the Counter64
datatypes would not help. I see the rmon mib now has tables for reporting
counter rollovers, so you can monitor those instead of the actual counts.
Amazing.
So, let's hear it, everyone. What are you collecting, on how many
interfaces, how often, on what hardware, and what's the bottleneck?
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager
justin_eagleson AT bankone DOT com
Sent by: owner-nv-l AT lists.us.ibm DOT com
05/19/2005 10:06 AM
Please respond to
nv-l
To
nv-l AT lists.us.ibm DOT com
cc
Subject
[nv-l] MIB data collection questions
Does anyone care to share their experiences (good or bad) using Netview to
poll SNMP nodes for MIB data collection? Specifically, Netview 7.1.4, and
storing the MIB data in a flat file. How scalable was it? How many nodes
at what interval? On what hardware was Netview running?
Any information is appreciated.
Regards,
Justin Eagleson
JPMorganChase Global Technology Infrastructure
Systems and Service Management Tools
office: 614-213-9017
pager: 877-864-2056
cell: 614-226-1148
This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the
intended recipient, you are hereby notified that any disclosure, copying,
distribution, or use of the information contained herein (including any
reliance thereon) is STRICTLY PROHIBITED. If you received this
transmission in error, please immediately contact the sender and destroy
the material in its entirety, whether in electronic or hard copy format.
Thank you.
|
