RE: [nv-l] Web Console
2005-05-19 20:45:10
Glen, are you using what you said you
were using, or are you using what Hasan said to use? Hasan has it right.
That error is what I would expect if I were pointing to the wrong
URL. Just a thought.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager
"Glen Warn" <Glen.Warn AT pemcocorp DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
05/19/2005 12:04 PM
|
To
| <nv-l AT lists.us.ibm DOT com>
|
cc
|
|
Subject
| RE: [nv-l] Web Console |
|
I'm not sure. Below is what
I am using - I think that's the default be cannot get it to work. As
for the proxy settings, I have validated my config is correct by connecting
to the jetty web page.
Please advise,
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn AT pemcocorp DOT com
206-628-5770
From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of Hasan Siraj
Sent: Thursday, May 19, 2005 9:00 AM
To: 'nv-l AT lists.us.ibm DOT com'
Subject: RE: [nv-l] Web Console
Hi Glen,
Aren't you using the default URL
for Applet.
http://NV6KHostName:8080/netview/NetViewApplet
Please also do the following in
your Internet Explorer "LAN Settings" in the Proxy Settings Exceptions.
In the area "Do not use proxy server for addresses beginning with
xxx.xxx.* (where xxx.xxx are the two octets of your NV6KHost)".
Best Regards
Siraj
-----Original Message-----
From: owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com]
On Behalf Of Glen Warn
Sent: Thursday, May 19, 2005 5:37 PM
To: nv-l AT lists.us.ibm DOT com
Subject: RE: [nv-l] Web Console
Hi Leslie,
When I try to run it straight
out of IE - I get this error (using this url http://NV6KHostName:8080/NetViewApplet
HTTP ERROR: 404 Not Found
Could not find resource for /NetViewApplet
RequestURI=/NetViewApplet
I've tried NetviewApplet.htm and
.html too but with no luck. I suspect it's my URL that's the problem.
If I run the web console app from the same machine it works
fine. I've tried it on 2 other machines with similar results too.
I do have a proxy server and have tried setting up the bypass proxy
and temporarily disabling the proxy. If you have any other ideas,
I'd like the flexibility of running it without installing addtional software.
I can connect to the jetty config
page if I use this URL http://NV6KHostName:8080
Please let me know,
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn AT pemcocorp DOT com
206-628-5770
From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of Leslie Clark
Sent: Wednesday, May 18, 2005 8:34 PM
To: nv-l AT lists.us.ibm DOT com
Subject: RE: [nv-l] Web Console
This may be a dumb question, but what exactly does the string 'Cannot
connect to the Web Server at hostname:8080'
say? Does it perhaps say, instead of hostname, the name of our PC? Every
single customer that I have walked through this has neglected to specify
the name of the Netview server in that authentication box. When first installed,
it is filled with the name of your PC. Just thought I'd ask.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager
"Glen Warn" <Glen.Warn AT pemcocorp DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
05/18/2005 08:20 PM
|
To
| <nv-l AT lists.us.ibm DOT com>
|
cc
|
|
Subject
| RE: [nv-l] Web Console |
|
I've had the same problem and my work around was to install the web console
client. Doing so allowed me to work fine - just that it was outside
of my standard browser. Be aware though, I think there are specific
versions of this client that should be sync'd with the version of the fixpack
you are running.
Good luck,
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn AT pemcocorp DOT com
206-628-5770
From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of Gill, Ronnie E
CIV USA DOIM/SMB
Sent: Wednesday, May 18, 2005 1:44 PM
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] Web Console
List,
I am relatively new to NetView and am having trouble getting the Web Console
to work. We are using NV 7.1.4 FP3 on a Solaris 9 O/S. I go
through the Server Setup and enable all of the Web Console Daemons as well
as set up users in the Configure Web Console Security area. I then
install the client on a WinXP workstation and try to connect. Needless
to say the connection fails with the following error:
Cannot connect to the Web Server at hostname:8080
Contact the administrator.
I run a "ps -ef | grep jetty.sh" and receive the following information:
root 9671 7618 0 May 16 ?
0:00 /usr/OV/service/spmsur -w 15 /usr/OV/www/bin/jetty.sh
I have looked in the documentation as well as searched the list archives
and cannot find anything that I'm doing incorrectly. Anyone out there
have any ideas as to what my problem could be?
Thanks
Ronnie Gill
Network Operations
DOIM
Fort Carson, CO
719-526-1674
Walla! Mail - get
your free mail today
|
|
|