RE: [nv-l] What is Default FMT:TEST??
2005-05-06 12:41:31
Thats an Enterasys(cabletron) Matrix
E1 Switch.
"Glen Warn" <Glen.Warn AT pemcocorp DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
06-05-05 09:25 PM
Please respond to
nv-l AT lists.us.ibm DOT com |
|
To
| <nv-l AT lists.us.ibm DOT com>
|
cc
|
|
Subject
| RE: [nv-l] What is Default FMT:TEST?? |
|
What kind of switch is it? If
it's a Cisco Catalyst, there are a variety of settings that can impact
the type and volume of traps it might send.
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn AT pemcocorp DOT com
206-628-5770
From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of usman.taokeer AT s-iii DOT com
Sent: Friday, May 06, 2005 4:58 AM
To: nv-l AT lists.us.ibm DOT com
Subject: Re: [nv-l] What is Default FMT:TEST??
Paul,
Yes there are equal number of Type-2 and
Type-3 messages, the damn switch is sending a message for every node that
goes down, and as its a LAN so when ever any one shuts down his PC the
switch sends this trap. i ve manually disable the switch to send any kind
of traps lets what happens... Thanks for your response!
~Usman
Paul <pstroud AT bellsouth DOT net>
Sent by: owner-nv-l AT lists.us.ibm DOT com
06-05-05 04:10 PM
Please respond to
nv-l AT lists.us.ibm DOT com |
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
|
|
Subject
| Re: [nv-l] What is Default FMT:TEST?? |
|
Usman,
I would expect if you are getting a lot of generic type 2 messages you
are also
receiveing a large number of generic type 3 messages. It sounds like you
have
a link that is trying to (re)establish a link to something(WAN?) and is
unsuccessful
and (re)tries on a regular basis to reconnect. This would have an almost
equal
number of type 2 and type 3 messages. If you are only receiving type 2
messages,
I would think something is misconfigured on the device itself. Have you
checked
the configuration of the switch to see if it is actually configured to
send traps to
NetView, or possibly to another network manager that is sending them to
NetView?
I can tell you from the trap information that you should take a look at
what is on
Interface(port?) 21(ifIndex) and that it is reporting Administratively
Up, but
Operationally down.
Paul
usman.taokeer AT s-iii DOT com wrote:
>
> Hi all,
>
> I am having too many events with the following details: -
>
> * DEFAULT FMT: TEST (1.3.6.1.6.3.1.1) generic:2 specific:0 args(3):*
> * [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.21 (Integer):
21*
> * [2] mib-2.interfaces.ifTable.ifEntry.ifAdminStatus.21 (Integer):
1*
> * [3] mib-2.interfaces.ifTable.ifEntry.ifOperStatus.21 (Integer):
2*
>
> Its coming from one of our LAN switches, the thing is that i havent
> configured this switch to forward any traps to NetView. Why am i
> having these events?
>
> Regards,
>
> Usman Taokeer
> Associate Network Architect
> Si^3
> UAN: 111.111.743
> EXT: 115
> FAX: 92.21.2425357
>
> ------------------------------------------------------------------------
>
> *DISCLAIMER*
> This email message is for the sole use of the intended recipient(s)
> and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited.
If
> you are not the intended recipient, please contact the sender by reply
> email and destroy all copies of the original message. Any views
> expressed in this message are those of the individual sender, except
> where the sender specifically states them to be the views of Si3.
>
|
|
|