Re: [nv-l] SNMP walk fails on Win2003
2005-01-05 15:40:27
James,
I tried giving community string in snmpwalk and still no reponse. I tried stop
& start SNMP service and finally re-booted the server but still have no
response.
George,
i tried using -d in snmpwalk.. below is the output.. It's transmiiting from
netview but no response from agent.. community string is rightly set in snmp
security with read write. Mind it this is on XP.. is it something to do with XP
snmp?
Transmitted 43 bytes to 10.33.100.137 (ems.us.schp.com) port 161:
Retry #3 Timeout: 30.00 seconds
0: 30 29 02 01 00 04 0f 53 61 6d 4e 65 65 64 73 4d 0).....money
16: 6f 72 65 50 61 79 a1 13 02 02 20 1e 02 01 00 02 .... .....
32: 01 00 30 07 30 05 06 01 2b 05 00 -- -- -- -- -- ..0.0...+.......
0: SEQUENCE (0x30): 41 bytes
2: INTEGER VERSION (0x2) 1 bytes: 0
5: OCTET STRING COMMUNITY (0x4) 15 bytes: "money"
22: GETNEXTREQUEST-PDU (0xa1): 19 bytes
24: INTEGER REQUEST-ID (0x2) 2 bytes: 8222
28: INTEGER ERROR-STATUS (0x2) 1 bytes: noError(0)
31: INTEGER ERROR-INDEX (0x2) 1 bytes: 0
34: SEQUENCE (0x30): 7 bytes
36: SEQUENCE (0x30): 5 bytes
38: OBJECT ID (0x6) 1 bytes: .1.3
41: NULL (0x5) 0 bytes
snmpwalk: No response arrived before timeout.
Thanks again,,
Larry
George deSocio <desocio AT us.ibm DOT com> wrote:
You can also use the "-d" parameter on snmpwalk to see a hex trace
interpretation of what is sent and received from the command to the agent.
Regards,
Geo.
George deSocio
IBM Americas Support - Distributed Network Management
Dept 46-E1ZA
IBM B660 CC109
HWY 54 & 600 Park Offices
Research Triangle Park, NC 27709
James Shanks/Raleigh/IBM@IBMUS
Sent by: owner-nv-l AT lists.us.ibm DOT com
01/05/2005 02:42 PM Please respond to
nv-l
To
nv-l AT lists.us.ibm DOT com cc
Subject
Re: [nv-l] SNMP walk fails on Win2003
Trapd doesn't care a whit about community names, so they don't matter in your
traps.
But snmpwalk and other such SNMP query commands do.
You have the option of specifying the community name to use in the snmpwalk
command, "-c community_string". If you try that with your new community name
does it work? If not, then you might want to stop and restart the SNMP service
or just reboot the box to make sure it takes your changes
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
" src="cid:_1_09CE079C09CE031C006DB26F85256F80">free lancer <larrytechie AT
yahoo DOT com>
free lancer <larrytechie AT yahoo DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
01/05/2005 01:51 PM
Please respond to
nv-l
To
nv-l AT lists.us.ibm DOT com
cc
Subject
Re: [nv-l] SNMP walk fails on Win2003
Sorry Guys,
It was my mistake.. Had enabled for snmp request from localhost only.. This is
solved. But I'm having same problem from XP. Any ideas why?
Larry
free lancer <larrytechie AT yahoo DOT com> wrote:
Hi,
This is something wierd. I have setup new Win2003 server and configured SNMP
settings in security and traps as well with custom community string. When i
start & stop SNMP service, i get traps in Netview but when i do snmpwalk from
Netview server, it just times out. i have checked in xnmsnmpconf -resolve
hostname and it gives right name and community string. But other 2003 server
work fine. Am i missing something here.
Many Thanks in Advance.
Larry
---------------------------------
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search. Learn more.
---------------------------------
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search. Learn more.
---------------------------------
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
|
|
|