James,
I have attached the MIB file but guess will not big take attachments.. Anyway
here is the clippet of the MIB file.. Hope you can guess what's missing?
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE,
Integer32,
Unsigned32,
Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue,
TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
cerentProducts,
cerentModules
FROM CERENT-GLOBAL-REGISTRY
CerentNotificationClass
FROM CERENT-TC;
cerent454MibModule MODULE-IDENTITY
LAST-UPDATED "000525000000Z" -- 2000/May/25
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" support AT Cisco DOT com
Postal: Cisco Systems
1450 N. McDowell Blvd.
Petaluma, CA 94954
USA
Tel: +1-877-323-7368"
DESCRIPTION
"This module provides the global registrations for all
other Cisco OTBU MIB modules."
REVISION "000525000000Z" -- 2000/May/25
DESCRIPTION
"o) This file can be used with R2.2 (Afgani) release.
o) Two new traps, freeMemoryOnCardVeryLow and
freeMemoryOnCardAlmostGone have been added."
REVISION "000314000000Z" -- 2000/Mar/14
DESCRIPTION
"A new trap, pertaining to RMON's history reset has been added. "
REVISION "000221000000Z" -- 2000/Feb/21
DESCRIPTION
"This file can be used with R2.1.1 release.
o) Has no changes from the previous version"
REVISION "000220000000Z" -- 2000/Feb/20
DESCRIPTION
"This file can be used with R2.1.0 release.
o) Has no changes from the previous version"
REVISION "000114000000Z" -- 2000/Jan/14
DESCRIPTION
"This file can be used with R2.0.3 release.
o) Has no changes from the previous version"
REVISION "000107000000Z" -- 2000/Jan/07
DESCRIPTION
"This file can be used with R2.0.2 release.
o) Has no changes from the previous version"
REVISION "991124000000Z" -- 1999/Nov/24
DESCRIPTION
"This file is to be used with R2.1 release.
o) The data integrity fault trap has a more clear
description of the trap (99/Nov/24)"
REVISION "990922000000Z" -- 1999/Sept/22
DESCRIPTION
"This file is specifically
intended for R2.0.1 release."
REVISION "990405000000Z" -- 1999/April/05
DESCRIPTION
"The inital version of the module"
::= { cerentModules 20 }
cerent454Mib OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The is the node under which all Cisco ONS 15454
specific mib object are located."
::= { cerentProducts 10 }
Many Thanks,
Larry.
James Shanks <jshanks AT us.ibm DOT com> wrote:
Most likely there is a missing MIB. What's in the IMPORTS section of the MIB
you tried to run mib2trap on?
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
" src="cid:10__=08BBE5F8DFE25C158f9e8a93df938 AT us.ibm DOT com" width=16>free
lancer <larrytechie AT yahoo DOT com>
free lancer <larrytechie AT yahoo DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
12/15/2004 03:24 PM Please respond to
nv-l
To
nv-l AT lists.tivoli DOT com
cc
Subject
RE: [nv-l] No FMT in trapd.conf
Hey Don,
I did execute the script to add the traps but none of the them were added.
Firstly when i did mib2trap mibfile mibfile.sh, i got many messages as below:
Left-over node nodeGroup ::= { cerent454Groups 10 } (0)
Enterprise object id not found for trap alarmUnknown, (6,1)
Then when i ran script file.. nothing added but error message was "enterprise
id could not be found.." Did you come across this when it happned to you?
Many Thanks,
Larry
"Davis, Donald" <donald.davis AT firstcitizens DOT com> wrote:
Larry,
One more thing.
mib2trap does produce a script with 274 traps defined when run against the
cerent454.mib.txt file.
Including the 2120 Threshold trap.
Don Davis -----Original Message-----
From: Davis, Donald [mailto:donald.davis AT firstcitizens DOT com]
Sent: Tuesday, December 14, 2004 3:56 PM
To: 'nv-l AT lists.us.ibm DOT com'
Cc: 'free lancer'
Subject: RE: [nv-l] No FMT in trapd.conf
Larry,
I discovered this MIB link the other day. It seems pretty comprehensive. Do a
<CTRL-F> and search for 3607.
http://www.assure24.com/databases/snmp-mib/private
It lists the following available Cerent MIBs. They are MIB-2...... :(
I briefly looked through the "NOTIFICATION-TYPE" clauses and see that a 2120
event is defined as follows.
DESCRIPTION "performance Monitor Threshold Crossing Alert"
::= { cerent454V2Events 2120 }
It looks like some threshold was exceeded with a value of 20. I could be way
off on this since I am not an SNMPv2 expert.
Like James said, you are going to have to define these yourself. Look through
the MIB files for "NOTIFICATION-TYPE".
These are the trap definitions.
Best regards,
Don Davis
NameDescriptionCERENT-454-MIB This module provides the global registrations for
all other Cisco OTBU MIB modules. CERENT-GLOBAL-REGISTRY This module provides
the global registrations for all other Cisco OTBU MIB modules. CERENT-TC This
module provides the global registrations for all other Cisco OTBU MIB modules.
-----Original Message-----
From: free lancer [mailto:larrytechie AT yahoo DOT com]
Sent: Tuesday, December 14, 2004 1:36 PM
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] No FMT in trapd.conf
Hi all,
I need some help. We are getting these "No FMT in Trapd.conf" as below:
" TEC_ITS_BASE - NO FMT IN TRAPD.CONF: mgmt.mib-2.snmp (1.3.6.1.2.1.11)
generic:4 specific:0 args(2): [1] private.enterprises.3607.6.10.100.10.20.0
(OctetString): 20041214125033D [2]
enterprises.3607.6.10.20.30.20.1.80.638648832.2120 (Integer): 20 "
Our Network guys say that this is Cerent 15454 device with 2.5 software version
and they don't have the software. I have looked into entire Cisco site but
unable to get this. Could anyone has the mibs and forward to me please.?
Also can this be manually added in trap config? if so what will be the
enterprise id, generic & specific?
We have 7.1.3 FP3 on AIX.
Many Thanks,
Larry.
---------------------------------
Do you Yahoo!?
Dress up your holiday email, Hollywood style. Learn more.
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have
received this electronic mail in error and that any use, dissemination,
forwarding, printing, or copying of this electronic mail is strictly
prohibited. If you have received this electronic mail in error, please
immediately notify the sender by return mail.
==============================================================================
---------------------------------
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
---------------------------------
Do you Yahoo!?
The all-new My Yahoo! ? Get yours free!
|
