Re: [nv-l] Avaya G3 Monitoring (resolved)
2004-11-05 16:41:58
This is my third response (sigh).
It was pointed out to me that my last
append on this subject was not quite technically correct. The
solution I offered, of commenting out the line
iso
OBJECT IDENTIFIER ::= { 1 }
does work. But the reason we rejected
the MIB was not because iso was the root of the tree, but because it was
incorrectly specified. The actual root of the international MIB tree
is "ccitt", which has the value zero. So to be completely
correct, this MIB has to say,
iso
OBJECT IDENTIFIER ::= { ccitt
1 }
and then it will load just fine.
This just shows you the dangers of redefining
everything back to the common parts of the tree. As long as your
defs are consistent with what's already loaded, then all is well. But
if you deviate from that , the MIB won't load. Which is why it's
better to start, as most vendors do, with just the parts they are responsible
for. In this case that would be this line, and everything which follows:
avaya
OBJECT IDENTIFIER ::= { enterprises
6889 }
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
James Shanks/Raleigh/IBM@IBMUS
Sent by: owner-nv-l AT lists.us.ibm DOT com
11/05/2004 04:03 PM
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
|
|
Subject
| Re: [nv-l] Avaya G3 Monitoring
(resolved) |
|
This is my second response.
I thought at first you were asking about pre-reqs but then I started to
puzzle over that error message and I couldn't see how that related, so
just for grins I downloaded one of these MIBs, g3mib20_asn1, to see what
it looked like. I collect problem MIBs as a sort of hobby. I
tried to load it and got the same error you did about the parent not being
defined.
Here's what the MIB looks like at the beginning with lots of definitions,
the first
3-AVAYA-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, DisplayString
FROM RFC1213-MIB
OBJECT-TYPE, NetworkAddress, IpAddress, Counter,
Gauge, TimeTicks
FROM RFC1155-SMI;
-- The following should be defined elsewhere
iso OBJECT IDENTIFIER
::= { 1 }
org OBJECT IDENTIFIER
::= { iso 3 }
dod OBJECT IDENTIFIER
::= { org 6 }
internet OBJECT IDENTIFIER ::=
{ dod 1 }
private OBJECT IDENTIFIER ::=
{ internet 4 }
enterprises OBJECT IDENTIFIER ::= { private
1 }
avaya OBJECT IDENTIFIER
::= { enterprises 6889 }
mibs OBJECT IDENTIFIER
::= { avaya 2 }
definity OBJECT
IDENTIFIER ::= { mibs 8 }
g3-mib OBJECT IDENTIFIER
::= { definity 1 }
g3proxmib OBJECT
IDENTIFIER ::= { definity 2 }
products OBJECT
IDENTIFIER ::= { avaya 1 }
def-products OBJECT IDENTIFIER ::= { products
8 }
g3-products OBJECT IDENTIFIER ::= { def-products
1 }
Now what the error message "Line 0: Error
defining object ": Parent" not defined." is
trying to tell you is that we don't know where to start putting all these
definitions. That's because we already start at the iso level
and you cannot redefine that. So all you have to do to get this to
load (and any others like this) is to comment out the line which reads
iso
OBJECT IDENTIFIER ::= { 1 }
by putting 2 dashes in front of it, like this
- - iso
OBJECT IDENTIFIER ::= { 1 }
and it should load just fine. It does for me.
In fact, everything down to the Avaya enterprise is redundant and could
also be commented out. But its re-defining the root of the MIB tree
is why we gave you the error message.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
reamd AT Nationwide DOT com
Sent by: owner-nv-l AT lists.us.ibm DOT com
11/05/2004 02:34 PM
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
| NetView User List <nv-l AT lists.us.ibm DOT com>,
owner-nv-l AT lists.us.ibm DOT com
|
Subject
| Re: [nv-l] Avaya G3 Monitoring |
|
Thanks Mahesh,
I attempted to load all the G3 mibs and
received error Line 0: Error defining object ": Parent"
not defined. I
assume it needs other mibs loaded prior to the G3's.. I have RFC1213-Mib
and RFC1155-SMI mibs loaded.. Thanks, Dave
Mahesh Tailor
<mahesh.tailor@network. T
carilion.com> To:
NetView User List <nv-l AT lists.us.ibm DOT com>
cc:
Sent by:
owner-nv-l AT lists.us DOT ibm bcc:
.com
Subject:
Re: [nv-l] Avaya G3 Monitoring
11/04/2004 03:38 PM
Please respond to nv-l
Try this link.
http://support.avaya.com/elmodocs2/MIB/
HTH
Mahesh
On Thu, 2004-11-04 at 15:06, reamd AT Nationwide DOT com wrote:
>
>
> Hi All,
> We are looking to monitor Avaya
G3 PBX's with netview. Does
> anyone do this? If so, can you tell me where the mibs are and/or how
you
> monitor them.
>
> Thanks, Dave
>
> AIX 5.1
> 7.1.4 FixPack1
--
Mahesh Tailor
WAN/TSM/NetView Administrator
Carilion Health System
Information Services
451 Kimball Avenue
Roanoke, VA 24016
Phone: 540.224.3929
Fax: 540.224.3954
|
|
|