[nv-l] #COM 3300 STACK UNIT REMOVED TRAP

Subject:	[nv-l] #COM 3300 STACK UNIT REMOVED TRAP
From:	Jeff Fitzwater <jfitz AT princeton DOT edu>
To:	nv-l AT lists.us.ibm DOT com
Date:	Thu, 23 Sep 2004 14:24:06 -0400

Does anybody know how to enable the TRAPS for 3COM 3300 STACKS sothat when a STACK MEMBER (unit) goes offline it will generate a trap?

I receive traps from the 3300 switch but when a unit of the stack isremoved or fails I never get a trap.

I do know that 3com uses RMON EVENTS to generate these traps andthere is one defined in the EVENT group called UNIT REMOVED but I do notknow how to enable it.

Any ideas out there?


Thanks in advance.



Jeff Fitzwater
OIT Network Systems
Princeton University

<Prev in Thread]	Current Thread	[Next in Thread>
[nv-l] #COM 3300 STACK UNIT REMOVED TRAP, Jeff Fitzwater <= Re: [nv-l] #COM 3300 STACK UNIT REMOVED TRAP, Oliver Bruchhaeuser

Previous by Date:	RE: [nv-l] Mib2trap, Davis, Donald
Next by Date:	[nv-l] NV 7.1.3 FP3 install fails, Qureshi, Fawad
Previous by Thread:	[nv-l] monitoring IP address-less T1 interfaces, Qureshi, Fawad
Next by Thread:	Re: [nv-l] #COM 3300 STACK UNIT REMOVED TRAP, Oliver Bruchhaeuser
Indexes:	[Date] [Thread] [Top] [All Lists]