nv-l

RE: [nv-l] EVent Browser flooded with useless events

2004-09-09 12:01:31
Subject: RE: [nv-l] EVent Browser flooded with useless events
From: Meyos Yemveng <yemveng AT yahoo DOT ca>
To: nv-l AT lists.us.ibm DOT com
Date: Thu, 9 Sep 2004 11:45:52 -0400 (EDT)
As I said in my original message:
1- there is no option on the SNMP Agent on  the device to filter these TRAPS by 
Severity
2- These Traps are  all coming from different sources but are the same Trap 
Number.
 
Therefore I think the best approach would be the Ruleset to block theses events 
if the Severity is <=3 and add that ruleset in ESE.automation.
 
Any Idea?

"Alan E. Hennis" <Hennis_Alan_E AT cat DOT com> wrote:

May I add that although this is the easiest thing to do it is better to
stop the traps from being sent from the source. NetView still has to
process all the traps, even if you don't log or display. It is best to stop
all unnecessary traps from the source. NetView has limits as to how many
traps it can process per second. IBM has told me it is about 10-12 traps
per second.


Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e AT cat DOT com



"Qureshi, Fawad" 
a.gov> 
Sent by: To 
[email protected] To 
us.ibm.com "'nv-l AT lists.us.ibm DOT com'" 

cc 
09/09/2004 10:08 
AM 


Please respond to 
nv-l AT lists.us DOT ibm Subject 
.com RE: [nv-l] EVent Browser flooded 
with useless events 









Caterpillar: Confidential Green Retain Until: 10/09/2004
Retention Category: G90 -
General
Matters/Administration


Easiest thing to do is use the "Don't Log or Display" option from xnmtrap
for the traps you do not want to see.

Fawad

-----Original Message-----
From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of Meyos Yemveng
Sent: Thursday, September 09, 2004 10:41 AM
To: netview Tivoli
Subject: [nv-l] EVent Browser flooded with useless events

Hi Folks,
NV 7.1.3 FP2 SOLARIS
I am receiving tons of events from many Nodes of same type
Not being able to filter these events at the source (from Vendor's
docs), As a result, my event browser is flooded of theses events of
Severity 0, which makes it impossible to see other events from other
sources.
The only solution left is to do it at the Netview Level.
I would like to display on the event browser only the events of
Severity >= 3
Q1: How can achieve this?



Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"




Post your free ad now! Yahoo! Canada Personals






Thank You,
Meyos 
"ALLEZ LES LIONS INDOMPTABLES"


---------------------------------
Post your free ad now! Yahoo! Canada Personals