nv-l

Re: [nv-l] build_location.pl

2004-05-24 13:42:59
Subject: Re: [nv-l] build_location.pl
From: Meyos Yemveng <yemveng AT yahoo DOT ca>
To: nv-l AT lists.us.ibm DOT com
Date: Mon, 24 May 2004 13:27:12 -0400 (EDT)
I indeed included the redirection operator ">"

Jane Curry <jane.curry AT skills-1st.co DOT uk> wrote:
Meyos,
Can I just check you have the correct syntax here - you need to redirect
the output from the mapdump command so you should have:
ovmapdump -v > ovmapdump.out

The ">" is the redirection operator.

Cheers,
Jane

Meyos Yemveng wrote:

> Certain I used ovmapdump -v ovmapdump.out
>
> what OS and perl version are you having succes with?
>
> */Paul /* wrote:
>
> Are you sure you used ovmapdump and not ovtopodump?
> You must use the mapdump for it work properly. Take a
> look at your output from ovmapdump and make sure it is
> readable.
>
> Paul
>
>
> Meyos Yemveng wrote:
>
> > I am having the same problem with the same version ....
> > Running on:
> > 1- Solaris 9 , Perl 5.6.1
> > 2! - Solaris 8, Perl 5.005_03
> >
> > It only prints the following:
> > # location.conf file was autogenerated on Friday May 21 17:48:01
> GMT 2004.
> > # Script completed processing on Friday May 21 17:48:05 GMT 2004
> >
> >
> > */Paul /* wrote:
> >
> > Scott,
> > Can you give a better description? What exactly is your problem.
> > I have used the script a number of times with no problems on
> > different versions of perl across several platforms. What are
> &! gt; you running into thats causing a problem?
> >
> > Paul
> >
> >
> >
> > Bursik, Scott {PBSG} wrote:
> >
> > > Actually the version I downloaded from
> > >
> > > http://www.nv-l.org/twiki/bin/view/Netview/LocationConf
> > >
> > > was the version with the function and I have the problem.
> > >
> > >
> > >
> > >
> > >
> > > Scott Bursik
> > >
> > > Enterprise Systems Management
> > >
> > > PepsiCo Business Solutions Group
> > >
> > > (972) 963-1400
> > >
> > > scott.bursik AT pbsg DOT com
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > *From:* Barr, Scott [mailto:Scott_Barr AT csgsystems DOT com]
> > > *Sent:* Friday, May 21, 2004 3:55 PM
> > > *To:* nv-l AT lists.us.ibm DOT com
> > > *Subject:* RE: [nv-l] build_location.pl
> > >
> ! > >
> > >
> > > The new version I have not yet posted uses that function. I
> > > just haven't had a time to post it to the NetView web home. Good
> > catc! h
> > > Ray - thanks.
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > *From:* owner-nv-l AT lists.us.ibm DOT com
> > > [mailto:owner-nv-l AT lists.us.ibm DOT com] *On Behalf Of
> > > *ray.smith AT clorox DOT com
> > > *Sent:* Friday, May 21, 2004 3:46 PM
> > > *To:* nv-l AT lists.us.ibm DOT com
> > > *Subject:* RE: [nv-l] build_location.pl
> > >
> > >
> > > The problem of empty output is caused by the readline function, a
> > > seldom used Perl function that apparently behaves differently in
> > > different versions of Perl. If you replace all instances of
> > > "rea! dline ($_[0])" with "", the script should work fine
> > > ! in any version (or at least version 4 or better, which is
> all I've
>! ; > > ever worked with) of Perl.
> > >
> > >
> > > Ray Smith
> > > IS Engineer
> > > The Clorox Services Company
> > > 925-425-4363
> > >
> > >
> > >
> > >
> > >
> > > *"Bursik, Scott {PBSG}" *
> > > Sent by: owner-nv-l AT lists.us.ibm DOT com
> > >
> > > 05/21/2004 01:02 PM
> > > Please respond to nv-l
> > >
> > >
> > >
> > >
> > > To: "'nv-l AT lists.us.ibm DOT com'"
> > > cc:
> > > Subject: RE: [nv-l] build_location.pl
> > >
> > >
> > >
> > >
> > > Just for the record, I had the same problem and my perl is at 5.6
> > > on AIX 4.3.3.
> > >
> > >
> > > Scott Bursik
> > > Enterprise Systems Managemen! t
> > > PepsiCo Business Solutions Group
> > >
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> > > *From:* Barr, Scott [mailto:Scott_Barr AT csgsystems DOT com] *
> > > Sent:* Friday, May 21, 2004 2:46 PM*
> > > To:* nv-l AT lists.us.ibm DOT com*
> > > Subject:* RE: [nv-l] build_location.pl
> > >
> > > I think 5.6 should work. I am on solaris 2.8 and had the issue
> > > with PERL 5.05. Let me research a bit and I'll post a response
> here.
> > >
> > >
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> > > *From:* owner-nv-l AT lists.us.ibm DOT com
>! ; > > [mailto:owner-nv-l AT lists.us.ibm DOT com] *On Behalf Of *Meyos Yemveng*
> > > Sent:* Friday, May 21, 2004 2:28 PM*
> > > To:* nv-l AT lists.us.ibm DOT com*
> > > Subject:* RE: [nv-l] build_location.pl
> > > I am runn! ing perl v5.6.1 on Solaris 9 ...
> > > Q: what version is recommended?
> > >
> > >
> > > */
> > > "Barr, Scott" /* wrote:
> > > Your PERL version may be a factor. Can you check what version you
> > > are using?
> > >
> > > perl -version will tell you
> > >
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> > > *From:* owner-nv-l AT lists.us.ibm DOT com
> > > [mailto:owner-nv-l AT lists.us.ibm DOT com] *On Behalf Of *Meyos Yemveng*
> >! ; > Sent:* Friday, May 21, 2004 1:20 PM*
> > > To:* netview Tivoli*
> > > Subject:* [nv-l] build_location.pl
> > > Hi Folks,
> > > I downloaded the build_location.pl script
> > > I then ran:
> > > ovmapdump -v > /tmp/ovmapdump.out
> > > build_location.pl /tmp/ovmapdump.out > /tmp/location.conf
> > >
> > &g! t; my ovmapcount.out is about 7026770 bytes
> > > my location.conf file generated is 141 bytes with only the
> > > following lines:
> > >
> > > # location.conf file was autogenerated on Friday May 21 17:48:01
> > > GMT 2004.
> > > # Script completed processing on Friday May 21 17:48:05 GMT 2004
> > >
> > > Q1: Any idea on what I did wrong?
> > > Q2: Any suggestions?
> > >
> > >
> > >
> > > Thank You,
> ! > > Meyos
> > > "ALLEZ LES LIONS INDOMPTABLES"
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> > > Post your free ad now! *Yahoo! Canada Personals*
> > >
> > >
> > >
> > > Thank You,
> > > Meyos
> > > "ALLEZ LES LIONS INDOMPTABLES"
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> > > Post your free ad now! *Yahoo! Canada Personals*
> > >
> > >
> >
> >
> >
> > Thank You,
> > Meyos
> > "ALLEZ LES LIONS INDOMPTABLES"
> >
> >
> >
> ------------------------------------------------------------------------
> > Post your free ad now! *Yahoo! Canada Personals*
> >
>
>
>
> Thank You,
> Meyos
> "ALLEZ LES LIONS INDOMPTABLES"
>
>
> ------------------------------------------------------------------------
> Post your free ad now! *Yahoo! Canada Personals*
>


--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2004 Jane Curry . All rights reserved.



Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"



Post your free ad now! Yahoo! Canada Personals