Hello again list,

 

Solved my initial problem, I had removed the line netviewd:/usr/OV..... from the netviewd.lrf.

 

If I register netviewd.lrf with the following in the file I get problems loading Netview, the process just seems to sit there and I cannot open a GUI. When I try to connect using the webconsole I get no maps open.

 

Netviewd.lrf as follows

 

netviewd:/usr/OV/bin/netviewd:

OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:

 

When I look in ovsuf I see the following.

 

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:::

 

Any suggestions would be appreciate, should I remove the additional lines in ovsuf??

 

Regards

Peter

 

-----Original Message-----
From: Ingleson Peter GB
Sent: 19 April 2004 10:56
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] netviewd.lrf problems

 

Hello List,

 

I've been trying to add the -ro flag to my netviewd.lrf file so my webconsole map runs as read only, however I kept receiving the error below. I removed the -ro from the file and still I receive this error. Any suggestions on where to look would be appreciated.

 

[gl02]:/usr/OV/lrf#sudo ovdelobj netviewd.lrf

ovdelobj - Static Registration Utility

ERROR:  Invalid value in LRF record #1, Quality Of Service field. (OVs 1-13)

 

My netviewd.lrf contains

 

OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:

 

Running on AIX 5.1 ML5  NV 7.1.3

 

Regards

Peter

------------------------------------------------------------------------------------------------------------
This message is intended for the addressee or its representative only.
Any form of unauthorized use, publication, reproduction, copying or
disclosure of the content of this e-mail is not permitted. If you are
not the intended recipient of this e-mail message and its contents,
please notify the sender immediately and delete this message and
all its attachments subsequently.