Re: [nv-l] NetView Filter Files and NetView 7.1.3
2003-11-25 14:23:13
FYI: IP Address ranges (ie, 10.10.10.1-2) do NOT work with filters. Implied wildcard and specific IP Addresses do work!
-Milt
Milton W. Bridges III
Network Automation Systems Programmer
Kaiser Permanente IT National Operations
Enterprise Automation Services, Design and Engineering
(909)739-5339
8-395-5339
| Milton W Bridges/CA/KAIPERM@Kaiperm
Sent by: owner-nv-l AT lists.us.ibm DOT com
11/24/2003 09:54 AM
Please respond to nv-l
|
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] NetView Filter Files and NetView 7.1.3 |
All I can do is try :-) I'll keep you posted.
Thanks for the advice.
-Milt
Milton W. Bridges III
Network Automation Systems Programmer
Kaiser Permanente IT National Operations
Enterprise Automation Services, Design and Engineering
(909)739-5339
8-395-5339
| James Shanks <jshanks AT us.ibm DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
11/24/2003 09:26 AM
Please respond to nv-l
|
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] NetView Filter Files and NetView 7.1.3 |
Why not just try it?
Or did you already?
As you noted before, this is not supported by the GUI, but then neither are wildcards.
I'm afraid I don't have time to do it myself, nor spend the afternoon looking thru the code trying to determine whether it is fully supported or not, but I can tell you that I have seen customer filter files with entries in them like this:
RuleContent=!((CLASS=1.3.6.1.4.1.2.6.3 && ((SNMP_SPECIFIC=1001) || (SNMP_SPECIFIC=1002) || (SNMP_SPECIFIC=1003)
|| (SNMP_SPECIFIC=1004) || (SNMP_SPECIFIC=58916871)))) && !((IP_ADDR=22.[0-9].15[0-2].*)
|| (IP_ADDR=22.[0-9][0-9].15[0-2].*) || (IP_ADDR=22.[0-9][0-9][0-9].15[0-2].*) ||
(IP_ADDR=22.[0-9].5[0-4].*) || (IP_ADDR=22.[0-9][0-9].5[0-4].*) || (IP_ADDR=22.[0-9][0-9][0-9].5[0-4].*)
|| (IP_ADDR=22.[0-9].5[6-9].*) || (IP_ADDR=22.[0-9][0-9].5[6-9].*) || (IP_ADDR=22.[0-9][0-9][0-9].5[6-9].*))
Whether this works well or not, that I cannot tell you. But you ought to be able to come up with a simpler test case.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
| Milton.W.Bridges AT kp DOT org
Sent by: owner-nv-l AT lists.us.ibm DOT com
11/24/2003 11:53 AM
Please respond to nv-l
|
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] NetView Filter Files and NetView 7.1.3 |
I'm trying to filter by specific ranges, and not wildcard networks. This is due to our networks being split by location, and I would like to create filter accordingly. Is that possible?
Thanks
-Milt
Milton W. Bridges III
Network Automation Systems Programmer
Kaiser Permanente IT National Operations
Enterprise Automation Services, Design and Engineering
(909)739-5339
8-395-5339
|
|
|