nv-l
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [nv-l] Netview through a firewall with NAT

2003-10-31 15:46:10
Subject: RE: [nv-l] Netview through a firewall with NAT
From: "Barr, Scott" <Scott_Barr AT csgsystems DOT com>
To: <nv-l AT lists.us.ibm DOT com>
Date: Fri, 31 Oct 2003 14:36:47 -0600
If you "discover" with SNMP but don't poll with SNMP then the status polls are PINGs which may not be allowed through your firewall. Try switching to SNMP polling.
-----Original Message-----
From: owner-nv-l-digest AT lists.us.ibm DOT com [mailto:owner-nv-l-digest AT lists.us.ibm DOT com]On Behalf Of DePhillips, Frank
Sent: Friday, October 31, 2003 2:25 PM
To: 'nv-l AT lists.us.ibm DOT com'
Subject: [nv-l] Netview through a firewall with NAT

I have some devices on the external side of the firewall that need to be monitored.  My Netview machine has a NAT and can find the devices once placed in the seedfile, but after the first polling cycle they become unreachable.  Does Netview have problems working through a firewall or dealing with NAT?
 
Thanks
 
Frank DePhillips
NMS Engineer
McLeodUSA
(281) 465-1208



NOTICE: This electronic mail transmission may contain confidential information and is intended only for the person(s) named. Any use, copying or disclosure by any other person is strictly prohibited. If you have received this transmission in error, please notify the sender via e-mail.




[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [nv-l] Netview through a firewall with NAT, DePhillips, Frank
Next by Date:  RE: [nv-l] nvsniffer / servmon, Barr, Scott
Previous by Thread:  [nv-l] Netview through a firewall with NAT, DePhillips, Frank
Next by Thread:  [nv-l] SNMP v2c - SNMP v2u, Qureshi, Fawad
Indexes:  [Date] [Thread] [Top] [All Lists]