D0h, thanks for correcting me!

Paul

Leslie Clark wrote:

Actually, I think Paul meant to say put a '%' in the seedfile to poll an address as a fake HSRP for intentional duplicates. The '^' turns off snmp polling for those devices that were converted to snmp polling by means other than the seedfile, such as oid_to_type entries or by having an unnumbered serial interface.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



        *Paul <pstroud AT bellsouth DOT net>*
Sent by: owner-nv-l-digest AT lists.us.ibm DOT com

10/24/2003 07:17 PM
Please respond to nv-l

To: nv-l AT lists.us.ibm DOT com cc: Subject: Re: [nv-l] Windows Clusters

Carlos,
No. Well, you can, but you would have to disable SNMP on those devices
and I'm
thinking that is not a desirable action.

What you can do, however, is poll the devices via SNMP instead of via
ICMP. This
is accomplished by placing a '$' in front of the device in the seedfile.
You will want
to do this for each machine in the cluster. As long as they all use
different IP
addresses, this will work fine. On some clusters, though, they will all
use the same

IP address. In that case, you could define that shared interface as an HSRP

interface by placing a '^' in front of the ip address in the seedfile.

Hope that helps.

Paul


CMazon AT commercebankfl DOT com wrote:

>
> Win2k/Netview 7.1.3. FP1 / SQL2000,
>
> Hi list,
>
> Maybe someone can shed some light for me.  We have 3 Microsoft
> clusters with several nic cards. One nic in each server is configured
> with an ip that are not pingable (192.168.X.X) for the cluster
> heartbeat. Is there a way to prevent Netview from discovering these
> interfaces?  I have them in the exclude list of the seed file and I
> tried to unmanage them, but somehow Netview continues to manage these
> interfaces on its own.
>
> Has anyone come accross this problem before?
>
> Also, is there any consultant on this list located in Miami, FL please
> email me directly. (Sorry for posting this here.)
>
> Carlos